Quick Select Function; Sleep Timer Function - Denon AVR-4311CI Owner's Manual

Quick select function

It is also possible to save three settings for ZONE2 or ZONE3.
n Saving the settings
1
Set the items below to the settings
you want to save.
q Input source (vpage 73)
w Volume (vpage 73)
2
Press ZONE SELECT to switch the
zone mode to (ZONE2) or
Z2
(ZONE3).
Z3
3
In the zone mode for which
you want to operate, press and
QUICK SELECT
hold the desired
until "Memory" appears on the
on-screen display or display.
The current settings will be memorized.
GQuick select defaultsH
Input source
Z2/Z3 QUICK SELECT 1 BD
SAT/CBL
Z2/Z3 QUICK SELECT 2
Z2/Z3 QUICK SELECT 3 DOCK
n Recalling the settings
1
ZONE SELECT
Press to switch the
zone mode to (ZONE2) or
Z2
(ZONE3).
Z3
2
QUICK SELECT
Press at which
the settings you want to call out
are saved.
Naming quick select settings
See "Quick Select Name" (vpage 105).
74

Sleep timer function

This is useful when you want to sleep while listening in ZONE2 or
ZONE3.
1
Press ZONE SELECT
zone mode to
(ZONE3).
Z3
2
Press SLEEP and display the time
you want to set.
The indicator on the display lights.
• The time switches as shown below each
SLEEP
time is pressed.
OFF 10 min
120 110 100
To confirm the countdown time before putting the
unit to sleep
SLEEP
Press .
"Z2 Sleep : zmin" or "Z3 Sleep : zmin" appears on the display.
z Countdown time
Volume
To cancel the sleep timer
–40dB
–40dB
SLEEP
Press to set "OFF".
–40dB
The indicator on the display turns off.
The sleep timer is also canceled when this unit is set to the standby
mode or the ZONE2 or ZONE3 power is turned off.
to switch the
(ZONE2) or
Z2
20 30 40 50
90 80 70 60