Playback (Basic Operation); Important Information; Adjusting The Master Volume; Selecting The Input Source - Denon AVR-4311CI Owner's Manual

Playback (Basic operation)

n Selecting the input source (vpage 28)
n Adjusting the master volume (vpage 28)
n Turning off the sound temporarily (vpage 29)
n Playing a Blu-ray Disc player/DVD player
(vpage 29)
n Playing a CD player (vpage 30)
n Playing an iPod ® (vpage 30)
n Tuning in radio stations (vpage 33)
n Playing a network audio (vpage 37)
n Playing a USB memory device (vpage 48)
Selecting a listening mode (Surround Mode)
(vpage 50)
Playback (Advanced operation) (vpage 65)

Important information

Before starting playback, make the connections between the different
components and the settings on the receiver.
NOTE
Also refer to the operating instructions of the connected components
when playing them.

Selecting the input source

Press the input source select button
NET/USB iPod DVD BD
( , , , ,
TUNER/DTU , DOCK , SAT TU ,
SAT/CBL GAME V.AUX PHONO
, , , ,
CD , DVR , TV ) to be played back.
The desired input source can be selected
directly.
Display the selected input source name on
the remote control unit.
28
iPod PLAY
• When is pressed, the input source of this unit is
switched to "DOCK" or "NET/USB" and the connected iPod is
automatically played (vpage 33 "iPod play function").
You can also use the following operation to select an input
source.
n Using the "SOURCE SELECT" menu
Switch the main remote control unit to the
when performing this operation (vpage 108 "Operating the main
remote control unit").
If the main remote control unit is in "ZONE2"or "ZONE3" mode,
the "SOURCE SELECT" menu will not be displayed when
SELECT
is pressed.
SOURCE SELECT
q Press .
Display the "SOURCE SELECT" menu.
SOURCE SELECT The currently selected input
source is highlighted.
Source
SAT/CBL
q
Recent
w
Player
Video
e
Network
Tuner
q Input Source
The name of the highlighted input source is displayed.
w Recently used sources
The recently used input sources (up to fi ve) are displayed.
e Icons for the input sources in the different categories are
displayed.
w Use uio p to select the input source,
ENTER
then press .
The input source is set and the source
selection menu is turned off.
• When using with an iPod connected directly to the USB port of this
unit, select "
• Input sources that are not going to be used can be set ahead of time.
Make this setting at "Source Delete" (vpage 104).
• To turn off the source selection menu without selecting an input
SOURCE SELECT
source, press
SOURCE SELECT
• When
M (MAIN ZONE) mode
automatically (vpage 108).
n Using the knob on the main unit
SOURCE
SOURCE SELECT
Turn
• If "Rec Select" or "Tuning Preset"
mode is selected for the input
source, press
SOURCE SELECT
turning
SOURCE SELECT
• Turning
Move
the input source, as shown below.
Enter
BD DVD
CD PHONO

Adjusting the master volume

Use VOL df
n When the "Volume Display" setting
(vpage 104) is "Relative"
GAdjustable rangeH
– – – –80.5dB – 18.0dB
n When the "Volume Display" setting (vpage 104) is
"Absolute"
GAdjustable rangeH 0.0 – 99.0
• The variable range differs according to the input signal and channel
level setting.
You can also operate via the main unit.
In this case, perform the following
operations.
MASTER VOLUME
Turn
volume.
(USB/iPod)" for the input source.
again.
is pressed, the AMP-operation mode starts
.
SOURCE
before
.
switches
TV SAT/CBL DVR GAME
HD Radio SIRIUS NET/USB DOCK
to adjust the volume.
to adjust the
V.AUX