Denon AVR-4311CI Owner's Manual page 39

n Selecting audio programs
HD Radio Technology enables stations to broadcast multiple Audio
Program and data services on HD2 / HD3 / HD4 channels.
Press to select the audio
ui
program.
If the station you are listening to has multiple
audio programs, "HD1" is indicated on the
display. If it only has one audio program,
"HD" is indicated.
n Presetting radio stations (Manual preset)
Your favorite broadcast stations can be preset so that you can tune
them in easily. Multicasts can also be preset. Up to 56 stations can
be preset.
• Stations can be preset automatically at "Auto Preset"
(vpage 81). If "Auto Preset" is performed after performing "Manual
Preset", the "Manual Preset" settings will be overwritten.
1
Tune in the broadcast station you
want to preset.
2
MEMORY
Press .
3
Press SHIFT to select the block (A
to G) in which the channel (1 to 8
per a block) is to be preset, then
press CH + , CH – or 1 – 8 to select
the preset number.
4
Press MEMORY again to complete
the setting.
• To preset other stations, repeat steps 1 to
4.
36
Default settings
Block (A – G)
and Default Settings
Channel (1 – 8)
87.5 / 87.9 / 89.1 / 93.3 / 97.9 / 98.1 / 98.9 /
A1 – A8
100.1 MHz
101.9 / 102.7 / 107.9 / 90.1 / 90.1 / 90.1 / 90.1
B1 – B8
/ 90.1 MHz
530 / 600 / 930 / 1000 / 1120 / 1210 / 1400 /
C1 – C8
1710 kHz
D1 – D8 90.1 MHz
E1 – E8 90.1 MHz
F1 – F8 90.1 MHz
G1 – G8 90.1 MHz
Specify a name for the preset broadcast station
(Preset Name) (vpage 81)
n Listening to preset stations
1
Press SHIFT to select the memory
block (A to G).
2
CH + CH – 1 – 8
Press , or to select
the desired preset channel.
You can also operate via the main unit.
In this case, perform the following
operations.
TUNING PRESET
Press , then turn
SOURCE SELECT
to select the preset
radio station.
n Direct frequency tuning
You can enter the receiving frequency directly to tune in.
1
SEARCH
Press .
2
Input frequencies using the 0 – 9.
• If o is pressed, the immediately preceding
input is cancelled.
3
When setting is completed, press
ENTER.
The preset frequency is tuned in.
n Check the HD Radio reception information
Press STATUS while an HD Radio
broadcast is being received.
The current reception information is
shown on the display.
q Normal
w Frequency / Signal strength
e Station name / Program and Program type
r Title name / Artist name
t Album name / Genre name
NOTE
If the station signal weakens while receiving a digital broadcast (while
and text is displayed), the mode automatically switches to the
analog reception mode (the reception frequency is displayed).
Because of this, the indicator and text may flicker if the station
signal level is weak and unstable.
Tuning in radio stations