Denon AVR-4311CI Owner's Manual page 103

Setting items
2ch Direct/Stereo SW Mode : Select low range signals to be reproduced by subwoofer.
(Continued) • LFE : When the "2ch Direct/Stereo" – "Front" setting is set to "Large",
the LFE signal alone is output from the subwoofer. Also, when the "2ch
Direct/Stereo" – "Front" setting is set to "Small", the front channel low
range signal is added to the LFE signal output from the subwoofer.
• LFE+Main : The front channel low range signal is added to the LFE signal
output from the subwoofer.
This setting can be set made "2ch Direct/Stereo" – "Subwoofer" is
set to "Yes".
Crossover : Set the maximum frequency of the bass signal output from
each channel to the subwoofer.
• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /
250Hz
• This setting can be set made "2ch Direct/Stereo" – "Subwoofer" is set
to "Yes".
• If the "2ch Direct/Stereo" – "Front" setting is "Large" and the
"Subwoofer Mode" setting is "LFE", "Full Band" is displayed and the
setting cannot be made.
Distance FL / Distance FR : Select the speaker.
• 0.0ft – 60.0ft (12.0ft) / 0.00m – 18.00m (3.60m) : Set the distance to
the speaker.
Set the difference in the distance between the speakers to less than
20 ft (6.0 m).
Level FL / Level FR : Select the speaker.
• –12.0dB – +12.0dB (0.0dB) : Adjust the level of each channel.
Auto Surround Mode ON : Memorize settings. Automatically play with the last used surround
Make setting for mode.
memorizing surround mode OFF : Do not memorize settings. Surround mode does not change
setting for each input signal according to input signal.
type.
• The auto surround mode function lets you store in the memory the
surround mode last used for playing the four types of input signals listed
below.
q Analog and PCM 2-channel signals
w Dolby Digital and DTS 2-channel signals
e Dolby Digital and DTS multi-channel signals
r LPCM and DSD Multi-channel signals
• When playing in PURE DIRECT, the surround mode does not change
even if the input signal is changed.
100
Remote control operation
buttons
Setting details
Move the cursor
(Up/Down/Left/Right)
Setting items
EQ Customize Audyssey : Set when not using "Audyssey" equalizer.
Set so that unused equalizer • Used : Use.
settings are not displayed • Not Used : Do not use.
MULTEQ
when is pressed.
Set so that "Audyssey" settings can be made when Audyssey ® Auto
Setup is performed.
Audyssey Byp. L/R : Set when not using "Audyssey Byp. L/R" equalizer.
• Used : Use.
• Not Used : Do not use.
Set so that "Audyssey Byp. L/R" settings can be made when
Audyssey Auto Setup is performed.
Audyssey Flat : Set when not using "Audyssey Flat" equalizer.
The equalizer mode in which
• Used : Use.
"Not Used" is selected
• Not Used : Do not use.
cannot be stored and
recalled in the Quick Select Set so that "Audyssey Flat" settings can be made when Audyssey
function. Auto Setup is performed.
Manual : Set when not using the "Manual" equalizer.
• Used : Use.
• Not Used : Do not use.
Confirm the setting
MANUAL SETUP
Setting details
Return to previous menu