Eject, Power, And Reset Buttons; Figure 4-3. Eject, Power, And Reset Button Removal - Dell OptiPlex GXa Service Manual

E
ject, Power, and Reset Buttons
computer cover
(upside down)
reset button
power button

Figure 4-3. Eject, Power, and Reset Button Removal

1. Lay the computer cover upside down on a flat work surface, with the
back of the cover facing you.
2. To remove the 3.5-inch diskette-drive eject button, pull gently on the
plastic part of the button until it comes free.
3. To remove the power button or the reset button, use a small screw-
driver and push in on the two or three plastic clips that hold the button
to the computer cover.
When these clips are released, the button comes free from the front panel of
the cover.
eject button
Removing and Replacing Parts on the Low-Profile Chassis 4-5