Eject, Power, And Reset Buttons; Figure 4-4. Eject, Power, And Reset Button Removal - Dell Precision 400 Service Manual
Dell precision 400: service manual
Hide thumbs
Also See for Precision 400:
- Owner's manual (214 pages) ,
- User manual (170 pages) ,
- Documentation update (4 pages)
Table of Contents
Advertisement
E
ject, Power, and Reset Buttons
computer cover
(upside down)
reset button
power button
Figure 4-4. Eject, Power, and Reset Button Removal
To remove the eject, power, and reset buttons, follow these steps:
1. Lay the computer cover upside down on a flat work surface, with the
back of the cover facing you.
2. To remove the 3.5-inch diskette-drive eject button, pull gently on the
plastic part of the button until it comes free.
3. To remove the power button or the reset button, use a small screw-
driver and push in on the two or three plastic clips that hold the button
to the computer cover.
When these clips are released, the button comes free from the front panel of
the computer.
eject button
Removing and Replacing Parts in the Midsize Chassis
4-5
Advertisement
Table of Contents
