Figure 6-6. 3.5-Inch Front-Panel Insert Removal - Dell OptiPlex GXa Service Manual

eject button mechanism
back of bezel
front of bezel

Figure 6-6. 3.5-Inch Front-Panel Insert Removal

To remove a 3.5-inch front-panel insert, follow these steps:
1. Hold the bezel with the front facing you.
2. Inside the bezel, press the eject button mechanism toward the front
panel to snap the plastic insert out of its opening.
To replace the 3.5-inch front-panel insert, work from outside the bezel. Place
the insert in position, and press it into the opening.
6-8 Dell OptiPlex GXa and OptiPlex NX Systems Service Manual