6-6
Dell OptiPlex GXa and OptiPlex NX Systems Service Manual
E
ject, Power, and Reset Buttons
eject button
power button
reset button
Figure 6-4. Eject, Power, and Reset Button Removal
1. Lay the front bezel on a flat work surface, with the back of the bezel
facing up.
2. To remove the 3.5-inch diskette-drive eject button, pull gently on the
plastic part of the button until it comes free.
3. To remove the power button or the reset button, use a small screw-
driver and push in on the two or three plastic clips that hold the button
to the bezel.
When these clips are released, the button comes free from the bezel.
front bezel