System Board Components; Figure 7-7. System Board Components - Dell OptiPlex GXa Service Manual

line-out jack
(LINE-OUT)
line-in jack
(LINE-IN)
optional NIC
connector (ENET)
video-memory
upgrade socket
(VIDEO_UPGRADE)
CD-ROM audio
interface
connector (CD_IN)
riser board
connector (RISER)
secondary EIDE
interface
connector (IDE2)
system board jumpers
7-8 Dell OptiPlex GXa and OptiPlex NX Systems Service Manual
S
ystem Board Components
The subsections that follow Figure 7-7 contain procedures for removing system
board and riser board components.
microphone
jack (MIC)
video connector
(MONITOR)
primary EIDE
interface connector
(IDE1)

Figure 7-7. System Board Components

Expansion-Card Cage
The computer has a removable expansion-card cage. The expansion-card cage
contains the hard-disk drive, the riser board, and any installed expansion card.
You must remove the expansion-card cage to remove or install the hard-disk
drive, an expansion card, or the riser board.
serial port 2 connector
(SERIAL2)
USB connectors
(USB)
diskette/tape drive
interface connector
(DSKT)
front of computer
keyboard/mouse
connectors (stacked)
(KYBD/MOUSE)
parallel/serial port 1
connectors (stacked)
(PARALLEL/SERIAL1)
microprocessor
fan connector
(FAN)
SEC cartridge
(SLOT1)
DIMM sockets (3)
(DIMM_A–DIMM_C)
main power input
connector (POWER_1)
3.3-V power input
connector (POWER_2)
battery socket
(BATTERY)
control panel
connector (PANEL)