Table of Contents
Advertisement
OPERATION
4. Motion Recording
4
.
Press Down [†] button to move the camera selection
menu. Select a Camera you wish to configure by using
Left/Right [œ √] buttons or Numeric buttons.
5
.
Press Down [†] button to navigate to the submenu and
use Left/Right [œ √] buttons to select other items.
6
.
Change the values by using [-, +] buttons.
ITEM
RECORD TIME
CAMERA SECTION
SENSITIVITY
MOTION GRID
1
.
Press [MENU] button to access the MAIN SETUP menu.
2
.
Select the "MOTION" menu by using Directional [...†œ √] buttons.
3
.
Press [ENTER] button to confirm.
• Determines the duration of recording when motion is detected. [1sec to 20sec]
• Select the Camera you wish to configure by using Left/Right buttons [ œ √ ] or Numeric buttons.
• Level 1 : Low sensitivity ~ Level 20 : High sensitivity. Select a Level by using [-, +] buttons.
• Use this menu to setup Zones for motion detection. The screen shown below will overlay
the current video image.
• Motion Grid is divided into 16 distinctive grids and selected by Numeric buttons on IR Remote.
•
: Select All by pressing Enter button after selecting this icon.
•
: Clear All by pressing Enter button after selecting this icon.
• The designated Motion zones display in blue and the Motion detected zones will be highlighted in
Green color. The factory default value is all set.
ADJUSTMENT
Motion Detected zones
23
DIGITAL VIDEO RECORDER
Advertisement
Table of Contents
