Table of Contents
Advertisement
PAN / TILT ZOOM CONTROL
The layout of the PTZ interface conforms to the layout of the front of the DVR or the remote controller. Menu button is the guide anchor
position for all other buttons. When in PTZ interface mode, all buttons used for the PTZ related operation.
** Please Check the followings before using PTZ Camera.
1
.
RS 232/485 Connection, camera Jumper Setting and etc
2
.
Set the PTZ Camera ID & MODEL NO in the Display menu.
2. Preset & Tour
Button
3. Custom Functions
Button
Please refer to manufacture's instruction manual for proper jumper settings to match the protocols for the DVR.
• Set preset position; SPOT OUT on the remote controller
- Move the PTZ to a desired location.
- Press the Preset button.
- Custom 1 will illuminate.
- Set the # for the Preset location.
- Press Enter to save and exit.
• Go to preset position; INFO on the remote controller
- Press the Go button.
- Enter the desired Preset # and press Enter.
• Start Auto Tour; BACKUP on the remote controller
- Press Auto Tour Button.
- Press the + button and enter the range of Preset and press Enter.
- For Example, Auto Tour Button, +5 will start the tour of 1 ~ 5 presets of the PTZ Camera
PTZ custom function 1; DISPLAY on the remote controller
PTZ custom function 2; ZOOM on the remote controller
PTZ custom function 3; P/T/Z on the remote controller
Function
Function
41
DIGITAL VIDEO RECORDER
Advertisement
Table of Contents
