Back Up Range Setup - Clover CDR-4770 Instruction Manual

BACKUP

3. Back up Range Setup

It is possible to set up backup range automatically on the Time Search Menu by selecting Month, Date, Hour and Minute.
- Press [Time Search] button to display the time search menu on the remote controller.
- Use Left /Right [œ √] button to choose a month in the box.
- Use directional [...†] buttons to select a day on the calendar. Graphical bars will be displayed to indicate video recordings
stored on the system. Then press [ENTER] button and Time Search menu will be displayed as follows.
- Press [-] button to set backup Start time and press [+] button to set End time. Selected time will be highlighted in Light Grey.
- Press [ESC] button twice to exit Time Search menu.
- Press [BACKUP] button on the remote controller and the following [BACKUP] menu will be displayed.
- Selected backup Start and End time will be displayed in the [BACKUP] menu as follows.
- Select "START" by using down(†) button and press [ENTER] button to start BACKUP.
48
DIGITAL VIDEO RECORDER