Table of Contents
Advertisement
OPERATION
[6-1. Record Setup]
ITEM
USE
QUALITY
RATE
AUDIO
INPUT
NOTE
Press
[MENU] button on each item at the first line to apply all setting for the rest of channels.
[6-2. Alarm Setup]
ITEM
RECORD TIME
RECORD CAMERA
ALARM BUZZER
ALARM OUT1
7
.
Press [ENTER] button to exit menu with saving changes. Press [ESC] to exit menu without making changes.
8
.
Press [REC] button after setting RECORD. Red LED light on the front panel will come on to indicate that recording has started.
• Enable (ON) or Disable (OFF) Alarm Recording for each camera.
• Select recording quality for each camera.
[ULTRA/SUPER/HIGH /MIDDLE/LOW]
• Select recording frame rate for each camera.
• Select audio recording : ON or OFF.
• Select input device.
For alarm recording, choose N.O. to connect N.O. (Normally Open) PIR Sensor.
• Determines the duration of recording when an alarm is activated by PIR (Passive Infrared) sensor.
[1 to 20sec].
• ALL : Records all alarm enabled channels if there any alarm is triggered.
• 1:1 : Records a channel for which alarm has been triggered.
• ON : Buzzer indicates whether alarm has been triggered.
Buzzer will remain on for the duration of record time. Set Alarm Out to "ON" for Alarm buzzer.
• OFF : Disables ALARM BUZZER function.
Press [-] button to stop alarm buzzer immediately.
NOTE
Stopping alarm buzzer does not stop recording.
• Configure which relay will be triggered when an alarm is activated per camera.
Choose one option among Video Loss, Motion, Alarm ALL, Each Alarm and System by using [-,+] buttons.
If "System" is selected, the relay will be triggered when System has problems
NOTE
such as HDD FAIL, FAN LOCK etc.
• Press [Esc] button to stop Alarm Out. It will be cleared in the following order : Alarm > Motion > Video Loss.
ADJUSTMENT
ADJUSTMENT
27
DIGITAL VIDEO RECORDER
Advertisement
Table of Contents
