Table of Contents
Advertisement
CLIENT PROGRAM-
1. CLViewer Program Introduction
The CLViewer Software allows you to view live video, search through archived video, control PTZ camera and have full setup control. The
CLViewer Software is a kind of Central Management Software for DVR users to fully control up to 16 DVRs (based on 4 channels)
simultaneously at a central station. The DVR system can have up to 3 simultaneous Remote Connections. Each user can perform functions
on the DVR system and will not affect the other users. The only exception to this is accessing Setup. Only one user is allowed to access
Setup at any given time.
1.1. Installation
Before installing the CLViewer, make sure your computer has the following minimum requirements.
OS
CPU
RAM
Video Card
HDD Free Space
Resolution
Resolution
If your PC does not meet the minimum system requirements, the CLIENT program may not function properly. All tests related to the
CLViewer (CLIENT) program were done under a single task environment; therefore if multiple tasks are run simultaneously, unexpected
error may occur. Moreover, the program may malfunction if inappropriate codecs have been installed on your PC.
The CLIENT program may not run properly if DirectX 8.0 or earlier version is installed. Please download the latest Direct X from Microsoft.
CLViewer
Recommended
Pentium
512MB RAM
Direct X 8.0 or higher
Overlay YUY2 Surface Supported
XP, VISTA
2.8 G
16 MB
2 GB
1024*768
51
DIGITAL VIDEO RECORDER
Advertisement
Table of Contents
