1. Manuals
  2. Brands
  3. Clover Manuals
  4. DVR
  5. DV1670
  6. Instruction manual

Clover DV1670 Instruction Manual

Stand-alone 16channel digital video recorder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
Stand-Alone 16Channel
DIGITAL VIDEO RECORDER
MODEL DV1670, DV1670D
Ver. 010312
Copyright © 2011 Clover Electronics U.S.A. All Rights Reserved.

Advertisement

Table of Contents
loading

Related Manuals for Clover DV1670

Summary of Contents for Clover DV1670

  • Page 1 INSTRUCTION MANUAL Stand-Alone 16Channel DIGITAL VIDEO RECORDER MODEL DV1670, DV1670D Ver. 010312 Copyright © 2011 Clover Electronics U.S.A. All Rights Reserved.
  • Page 2 System Users Manual Version 1.1 Manual created in summer of 2011. This user manual contains instructions for operations for DVR Unit, Client Application, Mobile Device Application and other helpful tips.

  • Page 3: Table Of Contents

    Table of Contents Contents Table of Contents ............................3 Chapter 1. Preface ............................10 1. About This Guide ..........................10 2. Precautions - Before You Start! ......................11 3. Precautions – After Powering On! ...................... 13 4. Precautions – Routine Maintenance! ....................14 5.
  • Page 4 2. Connection ............................39 3. Quick Power On ..........................41 4. Initial Boot ............................42 5. Setup Screen ............................43 6. Change Password and Enable Auto Lock .................... 44 7. Labeling Camera ..........................48 8. Enable Recording ..........................49 9. Prepare Network ..........................51 Chapter 4.
  • Page 5 MAC Address ............................72 Webcode ............................. 72 Versions ............................... 72 2. DISK MANAGER GUI ..........................73 Adding, installing HDD and other drives ..................... 73 Installing ODD (Optical Disk Drive)...................... 74 Configuring HDD1 and HDD2 ......................76 CD / DVD RW ............................77 Overwrite ............................
  • Page 6 Video Compression ..........................91 Video Resolution ..........................91 Video Quality ............................92 Speed of Video ............................ 92 2. Calculating Storage Required ......................94 4 Channel DVR Storage Reference Chart .................... 95 9 Channel DVR Storage Reference Chart .................... 96 16 Channel DVR Storage Reference Chart ..................97 3.
  • Page 7 7. How to operate PTZ camera ......................130 Chapter 13. Display Section In-Depth ....................... 132 1. OSD GUI ............................. 132 2.SPLIT / SEQUENCE GUI ........................134 3. TV ADJUSTMENT ..........................138 Chapter 14. Event Section In-Depth ......................139 1. SENSOR GUI ............................139 2.
  • Page 8 Search from iPhone ........................... 174 Controlling Relay-Out from iPhone ....................177 PTZ control from iPhone ........................177 2. Android Phone ..........................179 Program Installation for Android ...................... 179 Application Execution for Android ....................179 Register the product information for Android .................. 180 Modify/Delete of Registered Information for Android ..............

  • Page 10: Chapter 1. Preface

    Chapter 1. Preface 1. About This Guide Chapter 1. Preface This manual contains user instruction on how to operate the Digital Video Recording device (DVR Unit), Remote Controller, Client Application, Mobile Application and Central Monitoring Software Application. This manual also contains cautions and notification regarding safe operating parameters to protect the equipment and equipment operator.

  • Page 11: Precautions - Before You Start

    Chapter 1. Preface 2. Precautions - Before You Start! 2. Precautions - Before You Start! Item 1. DVR Unit’s power setting must be on POWER OFF position before power adapter is plugged into the DVR Unit. Press down on toggle button towards bottom. This event will prevent electric spark and prevent possible fire, electrocution and product damages.
  • Page 12 Chapter 1. Preface 2. Precautions - Before You Start! Item 5. Never uplift the cover to perform an upgrade, attempt a hardware repair while DVR Unit is still powered on. Users should be aware that taking the cover off from the DVR Unit might void the warranty without consulting with seller.

  • Page 13: Precautions - After Powering On

    Chapter 1. Preface 3. Precautions – After Powering On! 3. Precautions – After Powering On! Item 1. If you detect strange odor or detect strange rattling noise immediately turn the DVR Unit’s power off. Please contact your seller or service center for further instruction.

  • Page 14: Precautions - Routine Maintenance

    Chapter 1. Preface 4. Precautions – Routine Maintenance! 4. Precautions – Routine Maintenance! Item 1. Check to see if the LED (Light Emitting Diode) is on. If DVR unit does not have LED light on please check first if power button is on or off and make sure that it is at POWER ON position.

  • Page 15: Contents Of Items Included

    Chapter 1. Preface 5. Contents of Items Included 5. Contents of Items Included Screw Battery Program CD Remote Battery Adapter controller cable Component Description Stand Alone Digital Video Recorder Battery 1.5V (AAA) 2 pcs. Screw For HDD mounting Program CD Manual and Client program Adapter DC 12V 5A...
  • Page 16 Chapter 1. Preface 5. Contents of Items Included *If you are missing any components listed above please contact your seller for further instruction. Page 16...

  • Page 17: Chapter 2. Hardware Description

    Chapter 2. Hardware Description 1. Technical Specification Chapter 2. Hardware Description 1. Technical Specification Operating System: Embedded Linux Video Recording Compression: H.264 Video Transmission Compression: H.264 Supported Video Standards: NTSC / PAL Video Output: Composite (main monitor output) via BNC VGA monitor via VGA port TV connection via S-Video SPOT monitor via BNC...
  • Page 18 Chapter 2. Hardware Description 1. Technical Specification 2CIF resolution 240 frames per second at NTSC (200 fps at PAL) D1 resolution 120 frames per second at NTSC (100 fps at PAL) 16ch DVR – CIF resolution 480 frames per second at NTSC (400 fps at PAL) 2CIF resolution 240 frames per second at NTSC (200 fps at PAL) D1 resolution 120 frames per second at NTSC (100 fps at PAL) Recording Mode: Emergency, Schedule, Sensor, Motion, Sensor + Motion, Pre and Post Alarm Recording...

  • Page 19: Rear Panel

    Chapter 2. Hardware Description 2. Rear Panel 2. Rear Panel Figure 1 (4ch Model) Figure 2 (9ch Model) Figure 3 (16ch Model) Page 19...
  • Page 20 Chapter 2. Hardware Description 2. Rear Panel ① Power input – connection port for DC 12 volt ② Toggle Power Switch – POWER ON and POWER OFF switch that turns unit on and off ③ VGA (Video Graphics Array) Port – Location where VGA monitor cable must be inserted ④...

  • Page 21: Rear Port Specification And Connection Examples

    Chapter 2. Hardware Description 3. Rear Port Specification and Connection Examples 3. Rear Port Specification and Connection Examples Power input Input at 12 volt DC with positive polarity at 5 Amp [Please refer to the Figure 1 (4ch Model), Figure 2 (9ch Model), Figure 3 (16ch Model) item marked “①” Power input].
  • Page 22 Chapter 2. Hardware Description 3. Rear Port Specification and Connection Examples Figure 5. VGA Pin Configuration [Please refer to the Figure 1 (4ch Model), Figure 2 (9ch Model), Figure 3 (16ch Model) item marked “③” VGA Port]. VGA Pin Configuration Table Signal Type Pin Number Description...

  • Page 23: Main Monitor Output

    Chapter 2. Hardware Description 3. Rear Port Specification and Connection Examples Main Monitor Output BNC (Bayonet Neil Concelman or British Navel Connector) type 75 ohm. Connect a monitor that supports BNC Inputs or use a “BNC Twist Lock” to Composite Video adapter if your monitor only supports Composite Video Inputs.

  • Page 24: Camera Input

    Chapter 2. Hardware Description 3. Rear Port Specification and Connection Examples Camera Input The camera connections are the input ports for the video signal(s) used with the DVR. You may use any video source (75ohm) that outputs via a BNC connector (Twist Lock Type). If your video source outputs via RCA/Composite video, the proper adapter must be used when connecting the cable to the camera connection input port(s) of the DVR.
  • Page 25 Chapter 2. Hardware Description 3. Rear Port Specification and Connection Examples The RS-232 COM port is used to connect the DVR to a PC (optional updating procedure) or to connect an external device like a DVR controller (optional). The required settings to use the RS-232 port can be configured in the DVR settings.

  • Page 26: Optional Alarm Sensor Extension Box

    Chapter 2. Hardware Description 3. Rear Port Specification and Connection Examples Optional Alarm Sensor Extension Box There is optional Alarm Sensor Extension Box that connects to RS-232 port provided in our DVR unit. ① Power switch ② Power adaptor connector ③...

  • Page 27: 10-Way Terminal Block

    Chapter 2. Hardware Description 3. Rear Port Specification and Connection Examples NO output Dry Contact NC output Dry Contact Arm or Dis-Arm information Relay Switch 12V DC PGM1 Relay Switch Alarm Panel out1 out1 Sensor 2 out2 out2 +3V DC Figure 12 Alarm Sensor Extension Box Wire Example 10-Way Terminal Block There are RS-485, Alarm Output, and Sensor Input (1 to 4 Sensor) all located in 10-Way Terminal Block.

  • Page 28: Connections

    Chapter 2. Hardware Description 3. Rear Port Specification and Connection Examples Specification for 10-Way terminal block Rated current: 8A Contact resistance: 20m Insulation resistance: 5000M/1000V Withstanding Voltage: AC1500V/1Min Figure 14 10-Way terminal block Wire range: 18AWG 1mm² Warning Mechanical “S1~S4” port emits +5 volt current out Temp.

  • Page 29: Alarm Out

    Chapter 2. Hardware Description 3. Rear Port Specification and Connection Examples Figure 15 PTZ and Keyboard in RS-485 Alarm Out Connecting the alarm out: Each alarm output can be controlled/switched by DVR unit and its application software. Each device must be wired to C (Common) and NO (Normally Open). It passes no voltage (dry contact) Figure 16 Alarm Out Sensor Input Connecting the Inputs:...
  • Page 30 Chapter 2. Hardware Description 3. Rear Port Specification and Connection Examples Input Voltage Range: -5VDC (minimum) to 40VDC (maximum) Example 1. Dry contact sensor direct to DVR This example is the simplest form of sensor connection for DVR unit. Sensors dedicated only for the function for the DVR and example below depicts that Motion Sensors are not outputting any type of voltage (dry contact).
  • Page 31 Chapter 2. Hardware Description 3. Rear Port Specification and Connection Examples +12V DC Relay Switch +5V DC +5V DC +5V DC +5V DC Sensors are outputting no voltage, however DVR unit requires 5 volt DC to get response for sensor. Device Some Device outputting 12V DC should have Relay that provides...

  • Page 32: Usb Connection

    Chapter 2. Hardware Description 3. Rear Port Specification and Connection Examples USB Connection The USB connection ports are used for both back up and mouse control purposes. Either port can be used for back up via USB memory stick or for mouse control. A third option for the two USB ports are for firmware updating procedures.
  • Page 33 Chapter 2. Hardware Description 3. Rear Port Specification and Connection Examples Figure 20 Ethernet Cable Color Code EIA/TIA E568B Configuration Signal Type Pin Number Description LAN Tx+ Ethernet Transmit Positive LAN Tx- Ethernet Transmit Negative LAN Rx+ Ethernet Receive Positive Not Used Not Used Not Used...
  • Page 34 Chapter 2. Hardware Description 3. Rear Port Specification and Connection Examples First you must use cross over network cable. This is a cable created with crossing pin 1 to 3, 2 to 6 then pin 3 to 1, 6 to 2. Figure 22 Cross Over Cable You may now connect directly into PC and DVR unit to communicate directly.
  • Page 35 Chapter 2. Hardware Description 3. Rear Port Specification and Connection Examples CAT 5 E Internet Modem CAT 5 E CAT 5 E Router with Switch Figure 24 Modem and Router Configuration CAT 5 E CAT 5 E Internet Modem / Router Switch Figure 25 Internet Modem with Router Switch Page 35...

  • Page 36: Front Panel

    Chapter 2. Hardware Description 3. Front Panel 3. Front Panel Figure 26 Front Panel Button Description Use as Control button in Setup Menu (move up, down, left, right) ① Directional Button Use as Control button in Playback (Pause, Play, Stop, Rewind, Fast Forward) ②...
  • Page 37 Chapter 2. Hardware Description 3. Front Panel ⑨ Front USB Port Connect a USB mouse or USB drive. ⑩ Optional ODD is able to install. Page 37...

  • Page 38: Remote Controller

    Chapter 2. Hardware Description 4. Remote Controller 4. Remote Controller QUAD BACKUP AUDIO SEQ (Sequence) SEARCH NUMERIC BUTTONS MENU DIRECTION BUTTONS EMERGENCY SCHEDULE Page 38...

  • Page 39: Chapter 3. Quick Setup

    Chapter 3. Quick Setup 1. Placement Chapter 3. Quick Setup 1. Placement Step 1. Preparation Remove unit from out of the box and place it on the table top as seen below. Figure 27 Table top placement 2. Connection After unpacking the unit you must connect all camera connections, monitor connections, network connection, power connection and other optional connections.
  • Page 40 Chapter 3. Quick Setup 2. Connection Step 2. Connect monitor to DVR unit Depending on what type of monitor you are connection connect either to VGA or BNC monitor of your choice. If you have both types of monitor you may connect both of them.

  • Page 41: Quick Power On

    Chapter 3. Quick Setup 3. Quick Power On 3. Quick Power On Power input – connection port for DC 12 volt Step 1. Included DC Power adapter is located in accessory box. Step 2. Take the adapter and connect it with power cord. Step 3.

  • Page 42: Initial Boot

    Chapter 3. Quick Setup 4. Initial Boot 4. Initial Boot After turning on the DVR unit it will go into a boot sequence. At the initial boot section there is no user interaction with DVR unit however please observe to see if DVR unit is properly booting. Figure 33 Booting in progress As you may notice progress bar will indicate booting progression, if there is no activity for long period of time then...

  • Page 43: Setup Screen

    Chapter 3. Quick Setup 5. Setup Screen 5. Setup Screen To initiate setup menu you may use following method Mouse Remote Frontal Keypad Right mouse click anywhere on Press button labeled “Menu” on Pressing button labeled “Menu” on front of DVR unit’s directional the screen of DVR remote controller key pad button.

  • Page 44: Change Password And Enable Auto Lock

    Chapter 3. Quick Setup 6. Change Password and Enable Auto Lock 6. Change Password and Enable Auto Lock It is critical that you change the password and create user access to the DVR. By default admin password is 11111111 and user password is also 11111111. As default, you will be logged in as administrator and will have full privileges as administrator.
  • Page 45 Chapter 3. Quick Setup 6. Change Password and Enable Auto Lock Step 3. Choose the type of login account you want to change password to. In this example we would like to change the administer account. You may scroll though type of users that DVR will have by clicking the black reverse and forward arrow.
  • Page 46 Chapter 3. Quick Setup 6. Change Password and Enable Auto Lock Figure 43 Numeric Keypad and Password Confirmation Here you will be entering current password. Input the password into the numeric keypad and then confirm by selecting OK. Then you will need to end it with OK button. You need now to input with new password input process.
  • Page 47 Chapter 3. Quick Setup 6. Change Password and Enable Auto Lock Step 8. Under Button Settings section, you will have option to choose Auto Key Lock and Emergency Lock option. As default both section is disabled as you see in below figure. Auto Key Lock will calculate idle time of user intervention and auto time lock the DVR Unit.

  • Page 48: Labeling Camera

    Chapter 3. Quick Setup 7. Labeling Camera 7. Labeling Camera Sometime camera location may be identified easier by giving logical name to the camera. Here are steps to give logical name label instead of having default label. Step 1. Select “Camera” item on upper main category and select CAMERA TITLE Figure 50 Camera Title Menu Here you may choose camera(s) that you want to give logical name and repeat to other camera(s) as needed.

  • Page 49: Enable Recording

    Chapter 3. Quick Setup 8. Enable Recording 8. Enable Recording Main and primary function of DVR is to record video. Below section is showing how to configure all cameras to record immediately. DVR already may be configured to record on the HDD. It is always Step 1.
  • Page 50 Chapter 3. Quick Setup 8. Enable Recording Step 3. Globally configure all cameras to record by clicking on “All” mark to enable all cameras then set resolution to desired setting. Make sure that All is Unchecked. Set resolution either to 360X240 ~ 720X480 Step 4.

  • Page 51: Prepare Network

    Chapter 3. Quick Setup 9. Prepare Network 9. Prepare Network Step 1. Select “Network” item on upper main category then by default “IP ADDRESS” tab should appear as shown on screen below. Figure 52 IP ADRESS Page Make sure that DHCP is selected if you have a router that leases IP address to network. If you want to give the IP Address value to unit directly then uncheck the DHCP check box and input IP Address directly where (Arrow) is pointing to.
  • Page 52 Chapter 3. Quick Setup 9. Prepare Network still used with class A, B, or C address. In those cases, you must point to IP addresses that are not in lease range of the DHCP scope (IP address not issued by DHCP services but must be in same Subnet and Gateway IP).

  • Page 53: Chapter 4. Main Menu (Root Menu)

    Chapter 4. Main Menu (Root Menu) 1. Main Items. Chapter 4. Main Menu (Root Menu) There are 6 items shown on Main Menu or Root Menu. They are “system”, “search”, “backup”, “ER”, “PTZ” and “sound”. There are also “Warning”, “Split”, “Group”, “Auto Sequence” and “Log out” set of items below Main Menu items.

  • Page 54: Sub Operational Items

    Chapter 4. Main Menu (Root Menu) 2. Sub operational items. 2. Sub operational items. The “Warning” option will indicate any deficiency with DVR unit such as HDD error and Network Error types. The “Split” items shows screen configuration with following layout. Single View Quad View 6 View...

  • Page 55: Chapter 5. The "System" Root Menu Item

    Chapter 5. The “System” Root Menu Item Convention of Menu Tree Chapter 5. The “System” Root Menu Item Convention of Menu Tree To quickly understand nature of each field, items selectable in each field, possible selection combination of the field, behavior of each field and types of information shown by each field are graphically illustrated by using hierarchical organization using Tree illustration.

  • Page 56: The "System" Branch

    Chapter 5. The “System” Root Menu Item 1. The “System” Branch 1. The “System” Branch Language (Selectable) English Korean Disk 1 (Selectable) Remocon ID Japanese Format Russian (None Selectable) Italian Disk 2 %MB written Mouse Sensitivity Romanian Bulgarian (Selectable) Lithuanian Error List Video Standard Delete...
  • Page 57 Chapter 5. The “System” Root Menu Item 1. The “System” Branch File Upgrade (Selectable) Admin File User1 User2 (Selectable) User3 Shows Files if Configuration Upload User4 present User5 User6 Backup User7 *these are default values User ID (Selectable) Keyboard with alpha and numeric values (Selectable) Admin, Super User, User...

  • Page 58: The "Record" Branch

    Chapter 5. The “System” Root Menu Item 2. The “Record” Branch 2. The “Record” Branch (Selectable) All available Camera or by individually Each Click Turns pages (Selectable) 360X240 Resolution 720X240 720X480 (Selectable) 1 fps 3 fps 5 fps Same as 7.5 fps Schedule Record 15 fps...

  • Page 59: The "Network" Branch

    Chapter 5. The “System” Root Menu Item 3. The “Network” Branch 3. The “Network” Branch (None Selectable) IP Address Subnet Mask Gateway DNS Address (Selectable) DHCP (on) IP Address Subnet Mask Gateway DHCP (off) DNS Address Port (Selectable) Numeric 5 digit default 02000 DDNS Address (Selectable)

  • Page 60: The "Camera" Branch

    Chapter 5. The “System” Root Menu Item 4. The “Camera” Branch 4. The “Camera” Branch (None Selectable) 8 camera per page Covert (Selectable) Check box option on or off By individual camera or all camera Static Gain (None AGC Off Selectable) View only (Selectable)

  • Page 61: The "Display" Branch

    Chapter 5. The “System” Root Menu Item 5. The “Display” Branch 5. The “Display” Branch (Selectable) Check Box. Camera Title For All Checkbox – it will control the Status Bar behavior of Camera Title, Status Bar, Split Border and Split Border (Selectable) 800 X 600...

  • Page 62: The "Alarm" Branch

    Chapter 5. The “System” Root Menu Item 6. The “Alarm” Branch 6. The “Alarm” Branch Sensor 1~4 N.Open (None Selectable) View Only N.Close (Selectable) Check Box either N.Open or N.Close 1~4, 1~9, or 1~16 (Selectable) All Camera or select (Selectable) individual Use or Not Use Camera...

  • Page 63: Chapter 6. The "Search" Root Menu Item

    Chapter 6. The “Search” Root Menu Item 1. The “Calendar” Search Branch Chapter 6. The “Search” Root Menu Item 1. The “Calendar” Search Branch Year (Selectable) Only if the recording is available Month hour (Selectable) Indication Bar Anytime Page 63...

  • Page 64: The "Event" Search Branch

    Chapter 6. The “Search” Root Menu Item 2. The “Event” Search Branch 2. The “Event” Search Branch (Selectable) Choose all or individual camera 1~16 (Selectable) 1~12 Month (Selectable) 1~28,29,30,31 (Selectable) Increase or Year decrease (Selectable all Type of Event items, individual or none) Search...

  • Page 65: The "Date / Time" Search Branch

    Chapter 6. The “Search” Root Menu Item 3. The “Date / Time” Search Branch 3. The “Date / Time” Search Branch (Selectable) Camera One Item Only (Selectable) Main Disk One Item Only (Selectable) Month 1~12 (Selectable) 1~31 (Selectable) Year 4 digit year selector Second (Selectable)

  • Page 66: Chapter 7. The "Backup" Root Menu Item

    Chapter 7. The “Backup” Root Menu Item 1. Calendar, Quick and List Branch Chapter 7. The “Backup” Root Menu Item 1. Calendar, Quick and List Branch (Selectable) (Selectable) (Selectable) Select or Select or Select or unselect all unselect all unselect all camera camera camera...

  • Page 67: Chapter 8. The "Er", "Ptz", And "Sound" Root Menu Items

    Chapter 8. The “ER”, “PTZ”, and “Sound” Root Menu Items 1. Calendar, Quick and List Branch Chapter 8. The “ER”, “PTZ”, and “Sound” Root Menu Items The ER root menu item functions as panic recording features and only have one functional button which is the ER button itself.

  • Page 68: Chapter 9. Systems Section In-Depth

    Chapter 9. Systems Section In-Depth 1. INFORMATION GUI Chapter 9. Systems Section In-Depth 1. INFORMATION GUI Graphic User Interface (GUI) for INFORMATION section under SYSTEM is as shown below. The SYSTEM INFORMATION section page indicates what type of language is being used, remote controller ID information, control for the mouse sensitivity, video standards MAC (media access control) address, webcode (special unique identifier only given to our DVR units) and all versions of software and hardware that makes up the DVR unit.

  • Page 69: Remocon Id (Remote Controller Id)

    Chapter 9. Systems Section In-Depth 1. INFORMATION GUI Remocon ID (Remote Controller ID) This ID setting enables to control more than two DVRs with one remote controller. Order of configuration is first you need to select DVR to have ID that are not going to conflict with other DVR(s). Set the ID per each DVR and match the ID for use.
  • Page 70 Chapter 9. Systems Section In-Depth 1. INFORMATION GUI You will see Figure 60 ID selector screen. Your ID selector screen should appear with DVR ID: 01 in our example (figure shows 00) and you must use the directional button on the remote to configure larger number ID field to 01 as well.

  • Page 71: Mouse Sensitivity

    Chapter 9. Systems Section In-Depth 1. INFORMATION GUI Mouse Sensitivity This feature enables user how responsive are the movement of the mouse can be when user is operating a mouse via the USB connection provided either in front or back of the DVR unit. It only applies to the mouse sensitivity locally to the DVR not to the remote application.

  • Page 72: Mac Address

    Chapter 9. Systems Section In-Depth 1. INFORMATION GUI MAC Address As mentioned before MAC (Media Access Control) addresses are unique to individual network card or NIC (Network Interface Card). They are represented in six groups of two hexadecimal digits. These address are sometimes referred as physical address or hardware address as well.

  • Page 73: Disk Manager Gui

    Chapter 9. Systems Section In-Depth 2. DISK MANAGER GUI 2. DISK MANAGER GUI Below is the GUI for the DISK MANAGER section. Figure 61 Disk Manager GUI In this section where options for HDD there are options to see condition of all the HDD installed in the DVR unit as well as performing format, see HDD error and current condition of HDD using S.M.A.R.T.

  • Page 74: Installing Odd (Optical Disk Drive)

    Chapter 9. Systems Section In-Depth 2. DISK MANAGER GUI Figure 62 HDD Installation When you mount a single hard drive, mount it to “Master HDD” as described in the picture above and connect the power. Then, connect the SATA cable to the main board “HDD1.” When you’d like to mount two HDDs, install “Slave HDD”...
  • Page 75 Chapter 9. Systems Section In-Depth 2. DISK MANAGER GUI Detach the front panel from the unit and also detach the ODD cover. Mount the ODD to its bracket and connect the power. Then, connect the SATA cable to the ODD port. Page 75...

  • Page 76: Configuring Hdd1 And Hdd2

    Chapter 9. Systems Section In-Depth 2. DISK MANAGER GUI Figure 63 HDD 1 and HDD 2 example Configuring HDD1 and HDD2 Set the first HDD connected to “HDD1” in the system. Figure 64 Disk 1 Configuration 1. Set Main Disk or Mirror Disk. Main Disk or Mirror Disk option will be available.

  • Page 77: Cd / Dvd Rw

    Chapter 9. Systems Section In-Depth 2. DISK MANAGER GUI 3. Capacity: Used capacity/ Total HDD capacity (Ex : 0 / 238080 MB) Capacity indicator depicts capacity in percentage and actual files size in mega byte. CD / DVD RW If the ODD is mounted, V(Check) is displayed. And if not, “Ø” is displayed. Overwrite When the entire HDD volume is consumed, the saved data will be erased as much as new data entered.

  • Page 78: Disk Management)

    Chapter 9. Systems Section In-Depth 2. DISK MANAGER GUI S.M.A.R.T(Disk Management) Display the HDD temperature. If the temperature rises to the designated degree, DVR omits audible alert as well as creates an event that may be notified. Temperature setting range: Not use, 10’C, 20’C, 30’C, 40’C, 50’C, 60’C, 70’C, 80’C, 90’C Page 78...

  • Page 79: Default Setting Gui

    Chapter 9. Systems Section In-Depth 3. DEFAULT SETTING GUI 3. DEFAULT SETTING GUI If you ever need to revert to a factory default values of some or all information you have an option to choose between “Default Setting” or “Factory Default” button. Differences between two buttons are that;...

  • Page 80: Configuring Year/Month/Day

    Chapter 9. Systems Section In-Depth 3. DEFAULT SETTING GUI 4. TIME / DATE GUI In this section of GUI page you can perform operation to change time and date. It is recommended that you perform this operation when you first receive your unit for deployment and is installed in physical location of DVR unit placement.

  • Page 81: Configuring Date & Time

    Chapter 9. Systems Section In-Depth 3. DEFAULT SETTING GUI Configuring Date & Time Set the current date and time. Set the time and press “Apply”. And then check the popup message and select “Yes.” Figure 67 Confirmation of date and time change This message in Figure 67 Confirmation of date and time change appears when there exist some data in HDD that has different time than what you are changing to.

  • Page 82: Configuring Time Server

    Chapter 9. Systems Section In-Depth 3. DEFAULT SETTING GUI Above setting is started from 12:00, Sunday of the last week in July and ended at 00:00, Monday of the 3th week in August. Configuring Time Server It is used to keep the system time constant. It synchronizes the time through the selected time interval and the server.

  • Page 83: Upgrade Gui

    Chapter 9. Systems Section In-Depth 4. UPGRADE GUI 4. UPGRADE GUI In this section of GUI page, you will need to introduce the USB media with valid firmware update file and this GUI will show file name similar to Figure 69 UPGRAD GUI. Figure 69 UPGRAD GUI Save the firmware to the USB Memory Stick and insert it into the USB port of a DVR.

  • Page 84: Configuration Gui

    Chapter 9. Systems Section In-Depth 5. CONFIGURATION GUI 5. CONFIGURATION GUI You can archive the system configuration file to USB memory stick or restore the previous system configuration from the archived file. Figure 71 Configuration GUI Configuration Download Insert the USB memory stick to DVR unit and configuration file may be down save to USB memory stick. You will se configuration file similar to below Figure 72 Configuration Backup Button.

  • Page 85: Configuration Upload

    Chapter 9. Systems Section In-Depth 5. CONFIGURATION GUI Figure 73 Save configuration file to USB memory Now as seen on Figure 73 Save configuration file to USB memory configuration file. Configuration Upload Take the USB memory stick to DVR unit, you should have already prepared a memory stick with proper configuration on memory stick.

  • Page 86: Password Gui

    Chapter 9. Systems Section In-Depth 6. PASSWORD GUI 6. PASSWORD GUI This GUI section you can change details for user information, login, authority, and network camera view authority. There are 8 users accounts in our DVR, they are “admin”, “user1”, “user2”, “user3”, “user4”, “user5”, “user6”, and “user7”.

  • Page 87: Modifying User Information

    Chapter 9. Systems Section In-Depth 6. PASSWORD GUI Modifying User Information You can modify information of selected ID (account). Figure 76 Modify Section for User Information • ID : Displays ID selected through the list. If you want to change, select and enter through virtual keyboard.

  • Page 88: Configuring Network Covert

    Chapter 9. Systems Section In-Depth 6. PASSWORD GUI • All : Allows full authority. • Configuration : Allows to set the DVR. • Search : Allows to search. • Back up : Allows to backup. • Hard Disk : Allows to set the HDD such as Overwrite, Auto Delete, etc. •...

  • Page 89: Button Setting Gui

    Chapter 9. Systems Section In-Depth 7. BUTTON SETTING GUI 7. BUTTON SETTING GUI Button setting GUI is used to control the audible beep, autokey lock and emergency lock. Figure 79 BUTTON SETTING GUI Configuration of audible beep If it is selected, the DVR beeps on every button press in the front panel. : Beep, : No Beep) Configuration of Auto Key Lock...

  • Page 90: Configuration Of Emergency Lock

    Chapter 9. Systems Section In-Depth 7. BUTTON SETTING GUI Configuration of Emergency Lock This setting locks the emergency recording so that the emergency recording isn’t available. In case a user keeps the emergency recording on, it could overuse the HDD or overwrite the existing data. So, you can lock the emergency recording to prevent the problem.

  • Page 91: Chapter 10. Record Section In-Depth

    Chapter 10. Record Section In-Depth 1. Compression, Resolution, Quality, and Speed of Video Chapter 10. Record Section In-Depth In this section we will cover all aspects of record configuration, and how it effects the DVR’s performance, storage capacity, recorded image quality and frames per second of recorded video. 1.

  • Page 92: Video Quality

    Chapter 10. Record Section In-Depth 1. Compression, Resolution, Quality, and Speed of Video Video Quality On our DVR there are 5 levels of video quality. They are marked “Lowest”, “Low”, “Normal”, “High” and “Highest”. Since all H.264 images are compressed from its original images this 5 step of level dictates how much compression will be applied to each individual images being recorded.
  • Page 93 Chapter 10. Record Section In-Depth 1. Compression, Resolution, Quality, and Speed of Video You can have 720X480 recording in 1, 2, 3, 5, 6, and 7.5 frames per second.  For 16 channel DVR combination example; You can have 1 camera recording at 720X480 recording 15 frames per second. You can have 2 cameras recording 720X240 15 frames per second.

  • Page 94: Calculating Storage Required

    Chapter 10. Record Section In-Depth 2. Calculating Storage Required 2. Calculating Storage Required As you have had an opportunity to review compression, resolution, quality, and speed of video, all these factors are needed to intelligently calculate proper storage amount needed for each DVR unit or best configure each video.

  • Page 95: Channel Dvr Storage Reference Chart

    Chapter 10. Record Section In-Depth 2. Calculating Storage Required 4 Channel DVR Storage Reference Chart Here are some examples of easy to reference chart for 4ch DVR. Motion recording results may vary depending on actual circumstances of how DVR is program to record. Such impacting variables are how much motion will each camera will be recording and how sensitive motion detection areas are.

  • Page 96: Channel Dvr Storage Reference Chart

    Chapter 10. Record Section In-Depth 2. Calculating Storage Required 9 Channel DVR Storage Reference Chart Here are some examples of easy to reference chart for 9ch DVR. Special characteristic of 9 Channel DVR is that recording storages are shared between 9 channels not 8 channels, if it was 8 channels it may have been possible to have 30 fps all across even at 720X240.

  • Page 97: Channel Dvr Storage Reference Chart

    Chapter 10. Record Section In-Depth 2. Calculating Storage Required 16 Channel DVR Storage Reference Chart Here are some examples of easy to reference chart for 16ch DVR. Resolution Lowest Normal High Highest 500 Giga Byte / Recording Continuous 360X240 @ 30 fps 11 days 6 hrs 8 days 17 hrs 7 days 9 hrs...

  • Page 98: Event Recording Gui

    Chapter 10. Record Section In-Depth 3. EVENT RECORDING GUI 3. EVENT RECORDING GUI In this section of GUI you can set the Resolution, Frame and Event, etc. necessary to recording. Configuring Pre Recording When an event is triggered, this setting enables pre-recording around 1 to 5 seconds earlier. The pre-recording time is variable depending on the resolution and frame setting.
  • Page 99 Chapter 10. Record Section In-Depth 3. EVENT RECORDING GUI Figure 80 Recording Configuration ① Camera selector (Global or individual) Here in this camera icon you may select to use it or not use it. Below (Not Used) (Use) ② Resolution, Speed (fps), Image quality, Post record configuration These selectable variables are possible option configuration for continuous recording setup.

  • Page 100: Schedule Recording Gui

    Chapter 10. Record Section In-Depth 4. SCHEDULE RECORDING GUI 720X480 at 7.5 fps those are equivalent to 360X240 resolutions at 30 fps. So if you set 720X480 at 30 fps then it is equivalent to 360X240 at 120 fps so just on camera configuration of 720X480 at 30 fps you will change the fps indicator to “120/480”...
  • Page 101 Chapter 10. Record Section In-Depth 4. SCHEDULE RECORDING GUI Figure 81 Main Display Indication How to set : Call the Menu → Record → Schedule Record Select the channel Select the channel to record Set the recording schedule When scheduling, you can also select the recording mode such as Continue, Motion and Sensor, etc. You can schedule the recording mode by mouse dragging after clicking the recording mode.
  • Page 102 Chapter 10. Record Section In-Depth 4. SCHEDULE RECORDING GUI Motion: record when motion occurs Sensor: record when sensor is in operation Motion or sensor: record when either of motion or sensor occurs Continuation: record regardless of event Erase schedule Erase all Copy Apply the same settings to the other channel.
  • Page 103 Chapter 10. Record Section In-Depth 4. SCHEDULE RECORDING GUI Figure 82 Holiday Scheduling GUI Select the channel Select the channel to apply the schedule Select holidays Select holidays on the calendar to have them marked with red color. Then, holiday recording is applied to the selected date.
  • Page 104 Chapter 10. Record Section In-Depth 4. SCHEDULE RECORDING GUI Copy Apply the same settings to the other channel. You can also apply the same setting values to the multiple channels. (Not use) (Use) Delete Enter the first and last date and then press Delete to remove the saved holidays within the range. Page...

  • Page 105: Chapter 11. Network Section In-Depth

    Chapter 11. Network Section In-Depth 1. About Network Section and Clients Chapter 11. Network Section In-Depth 1. About Network Section and Clients The Network Settings menu enables the user to configure the DVR to be viewed, controlled, and maintained remotely by using the Remote Connection Application(s) (Included on the application disk that came with your DVR): 1.

  • Page 106: Ip Address Gui

    Chapter 11. Network Section In-Depth 2. IP ADDRESS GUI 2. IP ADDRESS GUI To access IP ADDRESS GUI select Network then IP Address Menu Figure 83 IP ADDRESS GUI The IP (Internet Protocol) Address is a logical address that is assigned to the DVR for presence on the network.
  • Page 107 Chapter 11. Network Section In-Depth 2. IP ADDRESS GUI Note… What is port-forwarding? Port forwarding allows remote computers, for example, computers on the Internet, to connect to a specific computer or device, like a DVR, within a private local area network (LAN) through the firewall (security feature that blocks inbound network traffic).

  • Page 108: Transmission Option

    Chapter 11. Network Section In-Depth 2. IP ADDRESS GUI The address you see here by default is the IP Address to a general DDNS server. Please DO NOT change this address while configuring your DVRs’ network settings. The changes you make under the DVRs’ “DDNS OPTION”...
  • Page 109 Chapter 11. Network Section In-Depth 2. IP ADDRESS GUI If the web server port was changed to 85, then you must enter – http://10.10.10.1:85/ (when using the IP address), or http://DVR.DDNSIP.NET:85/ (when using DDNS) Page...

  • Page 110: E-Mail Setup Gui

    Chapter 11. Network Section In-Depth 3. E-MAIL SETUP GUI 3. E-MAIL SETUP GUI This DVR supports email notification for events. This section is used to setup the email server and account settings to send these notifications by email: SMTP (Simple Mail Transfer Protocol) Server – This is the outgoing email server address. Use Port –...
  • Page 111 Chapter 11. Network Section In-Depth 3. E-MAIL SETUP GUI To - Enter the recipients email address, where the notifications are emailed to. You can set up to three email addresses. Page...

  • Page 112: Ddns Option Gui

    Chapter 11. Network Section In-Depth 4. DDNS OPTION GUI 4. DDNS OPTION GUI DVR’s DDNS service offers built in DDNS services or if chosen offers other DDNS services available by following DDNS sites: www.dyndns.org www.no-ip.com Figure 86 DDNS OPTION GUI These are two built in services with this DVR.

  • Page 113: Ddnsip.net Example

    Chapter 11. Network Section In-Depth 4. DDNS OPTION GUI Enter the Webcode and DVRs’ Domain Name. It can take up to 30 minutes for the registration process. Access your DVR via Internet Explorer by entering: “The DVR DOMAIN Name.DDNSIP.NET Make sure all port forwarding rules have been set on your firewall.
  • Page 114 Chapter 11. Network Section In-Depth 4. DDNS OPTION GUI Figure 88 DynDns.com Site [2] Create the sub domain name (Example: DVR-Sample) and select the main domain name provided with free. A user may select any name and then click the “ADD” button. Figure 89 Free DNS using dynds-ip.com [3] Then, input the detailed user information.
  • Page 115 Chapter 11. Network Section In-Depth 4. DDNS OPTION GUI Figure 90 Creating account in DynDns.com [4] When you see that the e-mail has been sent to you for verification, then check the e-mail. Figure 91 Confirmation Email [5] After opening the verification e-mail, if you click the link, the verification is proceeded automatically.
  • Page 116 Chapter 11. Network Section In-Depth 4. DDNS OPTION GUI [6] If the e-mail verification is completed, you can enter into the following website. Figure 92 Active Notification [7] After log-in, click “My Zones/Domains” in “My Service” menu. Figure 93 My Zone – DynDns.com *8+ Then, click “Dynamic DNS Hosts”...
  • Page 117 Chapter 11. Network Section In-Depth 4. DDNS OPTION GUI Figure 94 Host - DynDNS.com [9] Click the firstly registered domain(dvr-sample.dyndns-ip.com) Figure 95 Check IP - DynDNS.com [10] Input the public IP of installed router for IP Address. You can find the public IP of the router when you check the router setup.
  • Page 118 Chapter 11. Network Section In-Depth 4. DDNS OPTION GUI Figure 96 IP Address - DynDNS.com *11+ To activate the registered domain, click “Checkout to Activate.” Figure 97 Activate - DynDNS.com *12+ Then, click “Proceed to checkout” button below. Page...
  • Page 119 Chapter 11. Network Section In-Depth 4. DDNS OPTION GUI [13+ And click “Activate Services” below. [14] Then, selected domain IP is activated. *15+ Enter the ID/PW and domain set to the DVR. It’s for the routine renewal when the IP is changed. (Example) [16] Enter the domain name registered in the URL address to connect.

  • Page 120: Email Notification Gui

    Chapter 11. Network Section In-Depth 5. EMAIL NOTIFICATION GUI 5. EMAIL NOTIFICATION GUI Figure 98 Email Notification Section This menu is used to select the type of events that will be sent by the email notification feature: Mail Title – The subject like of the email notification Interval –...

  • Page 121: Network Frame Gui

    Chapter 11. Network Section In-Depth 6. NETWORK FRAME GUI 6. NETWORK FRAME GUI Figure 99 Network Frame GUI The Network Frame menu needs to be configured if you enable the “Dual Stream” feature. This menu is used to configure at what frame rate and video quality the DVR will stream over the network while using Dual Stream.

  • Page 122: Chapter 12. Camera Section In-Depth

    Chapter 12. Camera Section In-Depth 1. CAMERA SETTING GUI Chapter 12. Camera Section In-Depth In This section we will be covering Camera section, where there are controls for adjusting property, naming, PTZ, and viewing aspects of the Camera. 1. CAMERA SETTING GUI Camera Settings GUI has option to control Covert, AGC, Static Gain, Brightness, Contrast and Hue.

  • Page 123: Ptz Setting Gui

    Chapter 12. Camera Section In-Depth 2. PTZ SETTING GUI Brightness: Brightness controls enable the camera to be dim or bright in selectable level increments in 5% every step by 0%~100%. Contrast: Contrast controls enable the camera to be sharper line edges in 0~100% level. Hue: Controls the hue of the camera visual in range of 0~100% level.

  • Page 124: Additional Ptz Setting

    Chapter 12. Camera Section In-Depth 2. PTZ SETTING GUI Figure 102 PTZ Settings GUI 2 - Additional Settings [Note] In case of using more than one PTZ camera, ID should be different. Refer to PTZ camera manual for changing the ID. Additional PTZ setting Select the icons described below.
  • Page 125 Chapter 12. Camera Section In-Depth 2. PTZ SETTING GUI • Reverse Control : Moves reversely when PTZ moves. • Touring Mode - DVR : A PTZ camera works by the touring configuration set in DVR. - Camera : A PTZ camera works by the touring configuration set in PTZ camera. •...

  • Page 126: Controller Gui

    Chapter 12. Camera Section In-Depth 3. CONTROLLER GUI 3. CONTROLLER GUI You can connect a keyboard to operate the DVR. And the joystick control is very convenient to PTZ control. Figure 103 Controller GUI Model: Select the model to connect to the DVR. You should check the compatibility between the keyboard and DVR before purchasing.

  • Page 127: Camera Title Gui

    Chapter 12. Camera Section In-Depth 4. CAMERA TITLE GUI 4. CAMERA TITLE GUI You may change the title of the camera to give more geographical name or any desire name. Sometime camera location may be identified easier by giving logical name to the camera. Here are steps to give logical name label instead of having default label.

  • Page 128: Ptz Touring Gui

    Chapter 12. Camera Section In-Depth 5. PTZ TOURING GUI Names of the camera must be changed each individually and they are shown on both the live and recorded playback. On CMS and other mobile clients will also show the changed camera labels. 5.

  • Page 129: Serial Port Setting Gui

    Chapter 12. Camera Section In-Depth 6. SERIAL PORT SETTING GUI 6. SERIAL PORT SETTING GUI Serial Port Setting GUI is divided in RS-485 and RS-232 section as shown below. Figure 105 Serial Port Setting GUI Set Baud Rate, Parity and Stop Bit for RS-485 and RS-232 communication. Figure 106 Baud Rate, Parity and Stop Bit The Setting is variable depending on the PTZ camera model.

  • Page 130: How To Operate Ptz Camera

    Chapter 12. Camera Section In-Depth 7. How to operate PTZ camera 7. How to operate PTZ camera Select a channel and press the “PTZ” button to call PTZ control OSD. [By using the front direction button (Or remote controller)] • Use the direction button to move the PTZ camera. •...
  • Page 131 Chapter 12. Camera Section In-Depth 7. How to operate PTZ camera • Pan/Tilt : Click the mouse on the screen to move. • Focus : Click the right or left on the screen to adjust focus. • Zoom : Click the right or left on the screen to control zoom. [PTZ menu] On the front panel, if you select PTZ button from the PTZ mode, the function menu is displayed as below.

  • Page 132: Chapter 13. Display Section In-Depth

    Chapter 13. Display Section In-Depth 1. OSD GUI Chapter 13. Display Section In-Depth Display section controls how local view (view from monitor directly connected to DVR) is configured. 1. OSD GUI On OSD (On Screen Display) GUI you have control over showing or not showing “Camera Title”, “Status Bar”, and “Split Border”...
  • Page 133 Chapter 13. Display Section In-Depth 1. OSD GUI Status bar: Display the status bar on the bottom of the screen. There are information such as Time, Record status, Lock, Network and HDD capacity remained in the status bar. Figure 109 Status Bar Location Split screen: Display the split screen (as default white line is drawn if you unselect it then there will be no boarder between pictures) Figure 110 Split Screen Lines...

  • Page 134: Split / Sequence Gui

    Chapter 13. Display Section In-Depth 2.SPLIT / SEQUENCE GUI 2.SPLIT / SEQUENCE GUI There are options to control how split view and its sequence appearance could be configured. It is controlled by SPLIT /SEQUENCE GUI shown below. Figure 111 Split / Sequence GUI In above example shows 16 channel split that has no “Auto Loss Skip”...
  • Page 135 Chapter 13. Display Section In-Depth 2.SPLIT / SEQUENCE GUI In the box with camera number 1, if selected the right or left arrow will appear where you can choose which camera will be sown on 16 channel split window. You may do this for all 16 combination to choose the order of the camera.
  • Page 136 Chapter 13. Display Section In-Depth 2.SPLIT / SEQUENCE GUI Figure 118 9ch split configuration Figure 119 10ch split configuration Figure 120 13ch split configuration Dwell Time: All split configuration except 16 channel split configuration you could set dwell time represented in seconds. Figure 121 Dwell Time selection Order Selection: All Channel box are selectable and may change the order of it except 1 channel split configuration.
  • Page 137 Chapter 13. Display Section In-Depth 2.SPLIT / SEQUENCE GUI Figure 122 Order selection Auto Loss Skip: If configured (checked) then any missing or video loss camera will not be shown on selection menu and it will auto populate according to empty slot. EX: if camera number 15, 16 is lost, then on 9 channel split 1 batch will show 1~9 cameras next will show 10~14 and 1~4 on 2 batch.

  • Page 138: Tv Adjustment

    Chapter 13. Display Section In-Depth 3. TV ADJUSTMENT 3. TV ADJUSTMENT In this section you will use the configuration to adjust resolution and Icon size. Figure 123 TV Adjustment VGA: VGA (Resolution) selectable 800X600, 1024X768 or 1280X1024 Icon: Icon there are Normal, VGA and Small. Page...

  • Page 139: Chapter 14. Event Section In-Depth

    Chapter 14. Event Section In-Depth 1. SENSOR GUI Chapter 14. Event Section In-Depth 1. SENSOR GUI This DVR supports 4 sensor inputs for all 4 channel, 9 channel and 16 channel DVR. Figure 124 Sensor GUI Enable Sensor: Select the sensor to use. (Use) (Not use) Input Type: Choose between Normal Open and Normal Close.

  • Page 140: Alarm Gui

    Chapter 14. Event Section In-Depth 2. ALARM GUI 2. ALARM GUI You could configure how each “Events” (Motion, Sensor, Video Loss) respond with time individually as shown below. Figure 125 Alarm GUI Select the alarm duration time on each event (Motion, Sensor, Video Loss) In case of selecting the alarm duration time in blue-colored, it is applied to all channels Select the HDD Error and alarm duration time Page...

  • Page 141: Motion Detection Gui

    Chapter 14. Event Section In-Depth 3. MOTION DETECTION GUI 3. MOTION DETECTION GUI You can set the sensitivity and detection area in order to record when the motion event is triggered. Figure 126 Motion Detection GUI Select the channel: Select the channel using for the motion detection. (Not use) (Use) Sensitivity: Set the sensitivity to be detected.
  • Page 142 Chapter 14. Event Section In-Depth 3. MOTION DETECTION GUI Range: Set the area where a motion would be detected. There are also indications in pink color when motion is detected. It also serves as feedback on your sensitivity settings. If you see the pink color in the grid you choose for motion then such motion activity is sensitive enough to be detected.

  • Page 143: Spot Out Gui

    Chapter 14. Event Section In-Depth 4. SPOT OUT GUI 4. SPOT OUT GUI This setting enables the monitoring by the second monitor and also provides the display mode such as Event popup, Sequence, Event + Sequence and Fixed channel. Figure 128 SPOT Out GUI Set Sequence Dwell Time: Available to set from 0 to 30 seconds Spot Mode: •...

  • Page 144: Internal Buzzer Gui

    Chapter 14. Event Section In-Depth 5. INTERNAL BUZZER GUI 5. INTERNAL BUZZER GUI When an event is triggered, the DVR buzzes for the selected time. Figure 129 Internal Buzzer GUI Range: 1 to 30 seconds ( “----“: Not use ) Page...

  • Page 145: Extended Gui

    Chapter 14. Event Section In-Depth 6. EXTENDED GUI 6. EXTENDED GUI Once the extended box is connected, up to 16 sensor inputs and alarm outputs can be usable. ▶ Connection diagram Connect “Serial” port of DVR with “RS-232” port of the extension box. Connect the power cable of extension box and then turn the power on.

  • Page 146: Alarm Sensor Extension Box Setting

    Chapter 14. Event Section In-Depth 6. EXTENDED GUI Alarm Sensor extension box setting After connecting the extension box, you should set to have the system working. *1+ Select the “Use” then move arrow to select check mark. Figure 130 Extended GUI You will have check mark appear as Figure 130 Extended GUI shows above.

  • Page 147: Chapter 15. Search Operation

    Chapter 15. Search Operation 1. Getting to Search Screen Chapter 15. Search Operation In most cases search operation may be done through the client application, but some cases especially if you are going to perform evidence backup you will perform a search directly from the DVR unit itself. This chapter reviews how you could perform different types of search.

  • Page 148: Calendar Search

    Chapter 15. Search Operation 2. Calendar Search 2. Calendar Search Bring up menu that Figure 134 Search Menu shown below from search screen then press calendar. Figure 134 Search Menu Then you must click icon marked “calendar” to see below Figure 135 Calendar Search GUI. Calendar search can be performed if there are available recording on HDD.
  • Page 149 Chapter 15. Search Operation 2. Calendar Search If there is a no recording present then dates are not selectable as you see on Figure 136 Calendar with no recording. You must scroll thorough month and year to find calendar with recording available. Figure 136 Calendar with no recording If there is a recording you will see date selectable in orange squares.
  • Page 150 Chapter 15. Search Operation 2. Calendar Search If you have any data on particular hour and you will see mini blocks of 1 minute interval highlighted as seen Figure 139 Hour and Minute indicator with recorded data. Hour indicator currently pointed to 5 Minute indicator currently pointed to minute.

  • Page 151: Event Search

    Chapter 15. Search Operation 3. Event Search 3. Event Search If you have event recording enabled that you may choose such event from event list and perform a playback. You must see a menu that look like Figure 134 Search Menu seen below. Figure 140 Search Menu Then you must click icon marked “event”...
  • Page 152 Chapter 15. Search Operation 3. Event Search Figure 142 Populated List Pane As you can see only if you conduct search will it show the list item and as shown on figure above there are 161 pages available for example above. You may have different result. You need to also highlight the type of event that need to appear on list pane by selecting the event.

  • Page 153: Date And Time Search

    Chapter 15. Search Operation 4. Date and Time Search 4. Date and Time Search If you know exact time of search that you want to perform you may use the date and time search. Date and time figure can be changed on screen below by selecting month, day, year, hour, minute then second.

  • Page 154: Playback Control Menu Bar

    Chapter 15. Search Operation 5. Playback Control Menu Bar 5. Playback Control Menu Bar Below you see the actual playback via the 16 channel DVR. Even though there are 16 cameras recording on motion only certain camera appear. Cameras that show video images are those that have recording for that particular time.

  • Page 155: Play And Pause Operation

    Chapter 15. Search Operation 5. Playback Control Menu Bar Figure 147 Speed Control Play and Pause operation Figure 148 Play Control Play and pause by mouse operation is simply clicking desired location to obtain the result. However for frontal keypad and remote controller you must pres enter key to obtain the result for play and pause. Fast Play, Rewind Operation You may use fast forward option with mouse by pressing doubled arrow mark.
  • Page 156 Chapter 15. Search Operation 5. Playback Control Menu Bar Also you may do the same with reverse play and fast play backwards by operating it with mouse on Speed Control, or key pad. Figure 150 Rewind and Fast Rewind. They are selectable by 1X, 2X, 4X, 8X, MAX forward and backwards play view. Page...

  • Page 157: Mouse Only Operation

    Chapter 15. Search Operation 5. Playback Control Menu Bar Mouse Only Operation Some operations like the 2nd group of Playback Controls are fully functional only for the mouse operation. Some operations are available with key controls but not all will operate the same way because with key controls the full Playback Controls are not available.

  • Page 158: Interlacing Option

    Chapter 15. Search Operation 5. Playback Control Menu Bar However only the max view in case of 16 channel DVR between 1 and 16 channel view, in case of 9 channel DVR between 1 and 9 channel or in case of 4 channel DVR 1 and 4 channel view will be available. With using mouse on view control you may have many option of view as shown below.

  • Page 159: Quick Backup During Playback

    Chapter 15. Search Operation 5. Playback Control Menu Bar Audio options by default shows audio level 50% volume with second click you will be able to mute the audio. By moving the level adjust bar you are able to control the volume level. Quick Backup During Playback While playing the video back you do not have to exit the playback view to conduct a quick backup to media of your choice.
  • Page 160 Chapter 15. Search Operation 5. Playback Control Menu Bar After if you press backup button one more time you will now see the Quick Backup GUI to perform a backup operation. What Mark In function does is that from when you 1 press the backup button or mouse equivalent operation, DVR actually marks that exact time for Quick Backup GUI to start backup operation.

  • Page 161: Chapter 16. Backup Operation

    Chapter 16. Backup Operation 1. Calendar Backup Chapter 16. Backup Operation Backup is the function to archive the recorded video to a storage device such as an extended HDD or USB drive. If an ODD is built-in, it’s available to back up the files to the ODD as well. ☞...
  • Page 162 Chapter 16. Backup Operation 1. Calendar Backup Select the camera to back up. (Not select) (Select) Select the date Select the date to back up. Select the disk Select the disk to back up. • Main disk: Back up through the disk used as a main disk •...
  • Page 163 Chapter 16. Backup Operation 1. Calendar Backup Select the minute Select the minute to back up Set the backup start time Select the start time and then click the tap in the left side to set like the picture below. Select the backup completion time Select the completion time and then click the tap in the right side to set like the picture below And then press Next.
  • Page 164 Chapter 16. Backup Operation 1. Calendar Backup ☞ Note Above time setting is applied only when the backup date and hour is same. If the backup date and hour is different, set the start time first by setting date, hour and minute and then set the end time. ▶...
  • Page 165 Chapter 16. Backup Operation 1. Calendar Backup • Option : Select -Audio : Select when you back up by adding audio signal -Backup Viewer : Select when you back up by adding a backup viewer program Backup Size You can check the selected size to back up and the size of storage device. If the selected data is over the size of storage device, you have to set the backup time again.
  • Page 166 Chapter 16. Backup Operation 1. Calendar Backup Display Backup Completed Once the “Backup Completed” message is popped up, you may detach the storage device from the USB port. Page...

  • Page 167: Backup Viewer

    Chapter 16. Backup Operation 2. Backup Viewer 2. Backup Viewer You can play the backup files with the viewer program below. Click to run the viewer program. (Backup viewer program) Icon Description Open the file Fast reverse playback Reverse playback Step backward Pause Page...
  • Page 168 Chapter 16. Backup Operation 2. Backup Viewer Playback Fast forward Show the file list Switch to four split mode Switch to nine split mode Switch to 16 split mode Capture the image Control the Volume Select the channel ▶ AVI conversion You can convert the backup file into AVI format file.

  • Page 169: Chapter 17. Mobile And Remote Client Applications

    Chapter 17. Mobile and Remote Client Applications 1. iPhone Chapter 17. Mobile and Remote Client Applications 1. iPhone iPhone Application Installation 1. Access the “App Store” from your iPhone or iTunes application. 2. Search for “MPRMS”. 3. Choose to download and install the application (there is no charge to use our MPRMS application). 4.
  • Page 170 Chapter 17. Mobile and Remote Client Applications 1. iPhone Enter the “Reg Name” (Registration Name). This can be any name to identify the specified DVR. Make sure there are NO SPACES in the Reg. Name. Select the DVR Model: H.264 DVRs’ = DVR Page...
  • Page 171 Chapter 17. Mobile and Remote Client Applications 1. iPhone MPEG4 DVRs’ = FDS-110 MJPEG DVRs’ = MJPEG Enter the login information of the DVR. The login information MUST MATCH the login information on the DVR. Page...
  • Page 172 Chapter 17. Mobile and Remote Client Applications 1. iPhone DVR ID: Enter the User ID for accessing the DVR. Password: Enter the password for accessing the DVR. Enter the DVR IP Address & Port Number (You can also enter the domain name address here) DDNS Use Please disregard this configuration option if you are using DVR within the United States.
  • Page 173 Chapter 17. Mobile and Remote Client Applications 1. iPhone Connect remote access Page...

  • Page 174: Search From Iphone

    Chapter 17. Mobile and Remote Client Applications 1. iPhone “CH SELECT” to select camera number. PTZ : select when controlling pan-tilt The screen displays only video excluding time, resolution and the name of channel. The feature is designed to transmit still photo in certain intervals when video streaming is interrupted due to network load.
  • Page 175 Chapter 17. Mobile and Remote Client Applications 1. iPhone [1] Select Date/Time After selecting a date, select “SEARCH”. [2] Search key operation Play reverse Page...
  • Page 176 Chapter 17. Mobile and Remote Client Applications 1. iPhone Pause Play Switch to Live Page...

  • Page 177: Controlling Relay-Out From Iphone

    Chapter 17. Mobile and Remote Client Applications 1. iPhone Controlling Relay-Out from iPhone Relay can be controlled remotely.. Time selection : Set the duration time of alarm output Off : Alarm off Infinity : Keep the alarm output continued PTZ control from iPhone PTZ control is available on iPhone.
  • Page 178 Chapter 17. Mobile and Remote Client Applications 1. iPhone (1) Select (2) Cancel (3) Automatic camera focus (4) Call the PTZ menu (5) Direction button (6) Camera focus control (7) Camera zoom control (8) Select the channel (9) Relay out button (A user can set relay out) (10) Select the PTZ menu (11) OSD display On/Off button for live screen Page...

  • Page 179: Android Phone

    Chapter 17. Mobile and Remote Client Applications 2. Android Phone 2. Android Phone Program Installation for Android To install the program on the Phone, execute the ‘MARKET’ program and download the ‘MPRMS’ to install. If the installation is completed, you will see the ‘MPRMS’ icon on the main SCREEN. Application Execution for Android Select “MPRMS”...

  • Page 180: Register The Product Information For Android

    Chapter 17. Mobile and Remote Client Applications 2. Android Phone (Select the icon) (Executed Program) Register the product information for Android Register the product information for remote monitoring. [1] Register Select “Add” to start the registration. [2] Enter the registration information Page...

  • Page 181: Modify/Delete Of Registered Information For Android

    Chapter 17. Mobile and Remote Client Applications 2. Android Phone (1) Enter the name, Product ID(User) and Password. Name : Enter any name you want. User : Enter the “User ID” registered to the DVR. Password : Enter the “Password” registered to the DVR. (Note : “Menu”...

  • Page 182: Remote Connection For Android

    Chapter 17. Mobile and Remote Client Applications 2. Android Phone Select to edit the registered info. Select to delete the registered info. Close TOOL menu (As a dual function, it ends the connection) Remote connection for Android Select the registered list for connection. Once you click the registered device, it shows the brief information like the 1 picture below.

  • Page 183: Live View On Android

    Chapter 17. Mobile and Remote Client Applications 2. Android Phone (Select the list) (Detailed info.) Live view on Android It shows the currently monitored images with real-time. (1) Numeric Button : Press a numeric button to select a channel. (2) 1 frame: When selected, it transmits a still image with the certain interval in case the video streaming is interrupted due to the network load (3) Show OSD: Select to display the info.

  • Page 184: Ptz Control For Android

    Chapter 17. Mobile and Remote Client Applications 2. Android Phone Go back to the previous step or close the monitoring program Move to live mode (Channel change, 1 Frame and OSD display is available) Go to PTZ mode Go to PTZ preset mode Go to search mode Go to alarm mode See the registered info.
  • Page 185 Chapter 17. Mobile and Remote Client Applications 2. Android Phone (Select PTZ mode) (PTZ mode screen) (1) Go to PTZ mode Select the PTZ connected channel and click the PTZ button. (2) How to control PTZ The PTZ camera moves to the selected direction. Zoom in/ out Focus adjustment Touring...

  • Page 186: Ptz Preset For Android

    Chapter 17. Mobile and Remote Client Applications 2. Android Phone Auto Focus OK button for PTZ OSD menu Cancel or the upper menu on PTZ OSD menu PTZ Preset for Android You can set the movement of PTZ camera previously and make the automatic PTZ movement. (Select preset mode) (Preset mode screen) (1) How to go to PTZ mode...

  • Page 187: Search On Android

    Chapter 17. Mobile and Remote Client Applications 2. Android Phone Search on Android (1. Select the search mode) (2. Select “Time Search”) (3. Select the date and time) (1) Select the search mode (2) Select “Time Search”: Select “Time Search” to enter the search conditions. (Note: Select “To Live”...

  • Page 188: Relay Out For Android

    Chapter 17. Mobile and Remote Client Applications 2. Android Phone Relay Out for Android Relay can be controlled remotely. (1) Relay : Select On or Off (2) Number : Select the relay number. (3) Time : Select the duration time. (4) Execute : Make the alarm output work Page...

  • Page 189: Information Display Option On Android

    Chapter 17. Mobile and Remote Client Applications 2. Android Phone Information display option on Android It shows the information of current connection. (Select info) (Display the connection info ) [Display Info] Below is the example for an explanation. • IP : 61.250.157.37 : 2000 Via DDNS ← Connected IP information. •...

  • Page 190: End The Connection For Android

    Chapter 17. Mobile and Remote Client Applications 2. Android Phone End the connection for Android (Select the back button) (Select the Yes button) There are several ways to finish the program. 1. If you click ‘BACK’, it asks like “Do you want to disconnect?” Then, you may click Yes. 2.

  • Page 191: Windows Mobile

    Chapter 17. Mobile and Remote Client Applications 3. Windows Mobile 3. Windows Mobile Install the program to Windows Mobile Copy the program, MPRMS and save it to the mobile phone. Execute the program for Windows Mobile After save the program into the any folder, you can see the “MPRMS_Setup.cab” file as below picture. ☞...

  • Page 192: Register The Product Information On Windows Mobile

    Chapter 17. Mobile and Remote Client Applications 3. Windows Mobile You can see the icon of “MPRMS”. Register the Product Information on Windows Mobile For mobile viewing, you must register the network information of the DVR. As for the network setting of DVR, please refer to the user’s manual of DVR.
  • Page 193 Chapter 17. Mobile and Remote Client Applications 3. Windows Mobile Enter info. like the picture above. • NAME : Input any name you want. • ID : Enter the DVR’s login ID. • PASS : Enter the DVR’s login password. •...

  • Page 194: Connect / Disconnect On Windows Mobile

    Chapter 17. Mobile and Remote Client Applications 3. Windows Mobile • ADDR : Keep the default value of the DDNS server address (Default: www.adtcapscctv.net) • PORT : The port value will be changed automatically. Keep the value as it is. •...
  • Page 195 Chapter 17. Mobile and Remote Client Applications 3. Windows Mobile • Connect : Click the “Connect” to see the video. • Info Setup : To change the DVR information, click the “Info Setup”. • 1 Only : When selected, it transmits a still image with the certain interval in case the video streaming is interrupted due to the network load.

  • Page 196: Search On Windows Mobile

    Chapter 17. Mobile and Remote Client Applications 3. Windows Mobile To connect the other DVR, click the “DVR” and select the registered DVR in the “DEVICE”. After selecting the DVR, click the “Connect” to see the video. Search on Windows Mobile To play the recorded image, select “Search”...

  • Page 197: Ptz Control For Windows Mobile

    Chapter 17. Mobile and Remote Client Applications 3. Windows Mobile PTZ Control for Windows Mobile Click “Pan Tilt” to control the PTZ camera. Press the direction button to move the camera position. [NOTE : In order to stop moving, user must press the “STOP” button.+ •...
  • Page 198 Chapter 17. Mobile and Remote Client Applications 3. Windows Mobile Preset You can save the camera location previously and then send the camera to move to a specified pre- position. • P1~P16 : Select numbers to save • MOVE / SET ◎...

  • Page 199: Remote Alarm Control For Windows Mobile

    Chapter 17. Mobile and Remote Client Applications 3. Windows Mobile Remote Alarm Control for Windows Mobile Click “Alarm” to control alarm output. • Select a number (1~16) : Relay out port. (Default : 1) • Time : Set the duration time. •...

  • Page 200: Internet Explorer Version 7 And Later

    Chapter 17. Mobile and Remote Client Applications 4. Internet Explorer Version 7 and later 4. Internet Explorer Version 7 and later The monitoring by the web browser is available as the web server is built in the DVR. Initial Connection If you have actual TCP IP address of the DVR you my input them directly into Internet Explorer or you may use the DDNS IP as indicated below.
  • Page 201 Chapter 17. Mobile and Remote Client Applications 4. Internet Explorer Version 7 and later It takes around 10 to 15 minutes to get the service after the registration. So, please try the connection 10 to 15 minutes later. [2] How to connect Run the web browser on PC screen and enter http://soon.ddnsip.net to connect.

  • Page 202: Display Configuration

    Chapter 17. Mobile and Remote Client Applications 4. Internet Explorer Version 7 and later Display Configuration (1) Display area : Whenever you click, the selected channel or split screen is displayed. (2) DVR Name: Enter any name you want. When you reconnect the DVR in the same pc, the name is saved.) (3) DVR IP : The IP address registered to the DVR automatically is displayed.
  • Page 203 Chapter 17. Mobile and Remote Client Applications 4. Internet Explorer Version 7 and later (9) BACKUP : It’s available to back up the live or playback video. • Directory : Selects the folder to save. • File name : Enter the file name to save. •...
  • Page 204 Chapter 17. Mobile and Remote Client Applications 4. Internet Explorer Version 7 and later (19) SPEED : Control the PTZ speed (20) AUDIO : Select the audio channel to listen (21) GDI : Display the video with GDI type (It increases the system load and it’s recommended for the PC built-in the VGA card of high spec.
  • Page 205 Index 10-way terminal block, 17, 20, 27 AVI, 168 16 Channel DVR Storage Reference, 97 backup, 53, 87, 88, 147, 159, 160, 161, 163, 164, 2CIF, 17, 18, 91, 92, 96 165, 167, 168 352X240. See CIF Backup, 36, 43, 45, 66, 84, 159, 160, 161, 164, 352X288.
  • Page 206 De-Interlacing, 158 Hue, 122, 123 DHCP, 17, 33, 34, 51, 106, 107, 108 image tear, 158 Dimension, 18 Internal IP address, 51 Directional Button, 36 IP address, 33, 34, 51, 106, 107, 108, 109, 194, DMZ, 52, 113 200, 202 dry contact, 29, 30 iPhone, 105, 169, 174, 177 dry sensors, 31...
  • Page 207 QUAD, 36, 38 Audio, 17 Quick Backup, 160 Operating System, 17 Recording Frame Speed, 17 Video Recording Compression, 17 Recording Resolution, 17 Video Transmission Compression, 17 Rewind, 18, 36, 155, 156 Temperature right and left field, 158 maximum temperature, 11 Right mouse click, 43 operating temperature, 11 RJ-45 port.

This manual is also suitable for:

Dv1670d

Table of Contents