Motion Detection - Clover HDV043 Instruction Manual

8-2. Motion Detection

It is the motion detection setup menu.
[1] Channel : Select the motion detection channel.
[2] On/Off : Select the motion detection usage.
[3] Sensitivity : Select the sensitivity of motion detection. Please apply it after the actual
testing.
[4] Detection Area: Select the motion detection area. ( 1~5 )
The cursor moving by the direction key and if press "enter", this block is designated for
motion detection.
• MD selected area : Pink color
• MD non-selected area : Transparent
• If the movement is detected, the color of that area turns green.
[Using mouse]
Locate the pointer on start point and click the right button then dragging to the ending
point.
65 | P a g e