Snmp > Views; Views; Snmp > Group Profile; Group Profile - Cisco Linksys RVL200 User Manual

Chapter 4
SNMP > Views
Configure this screen to allow or deny access to SNMP
features.
SNMP > Views

Views

View Table
Vew Name
Select the appropriate view name. There are
two default views:
Default
This displays the default SNMP views for read and
read/write views, including the following MIB OIDs:
1 included
•
1.3.6.1.6.3.13 excluded
•
1.3.6.1.6.3.16 excluded
•
1.3.6.1.6.3.18 excluded
•
1.3.6.1.6.3.12.1.2 excluded
•
1.3.6.1.6.3.12.1.3 excluded
•
1.3.6.1.6.3.15.1.2 excluded
•
1.3.6.1.4.1.3955.2.1.13
•
community table)
1.3.6.1.4.1.3955.2.2.8 excluded (disable/enable SNMP,
•
advanced management SNMP status)
1.3.6.1.4.1.3955.2.2.16 excluded (trap manager table)
•
DefaultSuper
This displays the default SNMP view for administrator
views. It does not block any subtree OID.
New Vew Name
Enter a new view name.
SubTree ID Tree
Linksys supports user-defined OIDs.
These are some of the common MIB OIDs:
4-Port SSL/IPSec VPN Router
excluded (Linksys MIB
Advanced Configuration
IP-MB
1.3.1.2.1.48
•
IF-MIB 1.3.6.1.2.1.31
•
TCP-MIB 1.3.6.1.2.1.49
•
UDP-MIB 1.3.6.1.2.1.50
•
SNMPv-MIB 1.3.6.1.6.3.1
•
RCF-MIB 1.3.6.1.2.1.1
•
SNMP-VIEW-BASED-ACM-MIB
•
SNMP-COMMUNITY-MIB
•
SNMP-FRAMEWORK-MIB
•
SNMP-MPD-MIB 1.3.6.1.6.3.11
•
SNMP-USER-BASED-SM-MIB
•
SNMP-TARGET-MIB 1.3.1.6.3.12
•
LINKSYS-MIB 1.3.6.1.4.1.3955
•
Vew Type Select ncluded if the defined OID will be
included in the selected SNMP view. Select excluded if
the defined OID will be excluded.
Click Add to Lst, and configure as many entries as you
would like, up to a maximum of 20. To delete an entry,
select it and click Delete.
Click Save Settngs to save your changes, or click Cancel
Changes to undo them.
SNMP > Group Profile
Define the SNMP groups and their features, including
SNMP version usage and access rights.
SNMP > Group Profile

Group Profile

Group Table
Group Name
Enter a name for the group, up to 30
characters.
1.3.6.1.6.3.16
1.3.6.1.6.3.18
1.3.6.1.6.3.10
1.3.6.1.6.3.15
44