Rv042 #2 Configuration - Cisco Linksys RVL200 User Manual

Appendx K
Enter 9.8.. in the Default Gateway field.
9.
10. Enter  in the Hop Count field.
11. Select WAN from the Interface drop-down menu.
12. To create the static route, click Add to lst.
13. Click Save Settngs.
14. Click the Frewall tab.
15. For the Firewall setting, select Dsable.
16. Click Save Settngs.

RV042 #2 Configuration

1. Launch the web browser for a computer connected
one of the Ethernet ports of the RV042 #2.
2. Access the web-based utility of the RV042 #2. (Refer to
the User Guide of the RV042 for details.)
3. Click the Setup tab.
4. Click the More tab.
5. Click the Advanced Routng tab.
For the Working Mode setting, select Router.
6.
In the Statc Routng section, enter 9.8.0.0 in
7.
the Destination IP field.
8. Enter ...0 in the Subnet Mask field.
9. Enter 9.8..0 in the Default Gateway field.
10. Enter  in the Hop Count field.
11. Select WAN from the Interface drop-down menu.
12. To create the static route, click Add to lst.
13. Click Save Settngs.
14. Click the Frewall tab.
15. For the Firewall setting, select Dsable.
16. Click Save Settngs.
4-Port SSL/IPSec VPN Router
Configuration of Multiple Subnets
9