Rv042 #1 Configuration - Cisco Linksys RVL200 User Manual

Appendx K
Setup > Network
4. In the LAN Setting section, select Multple Subnet.
5. Click Add/Edt. A new screen appears.
Create a Subnet
In the LAN IP Address field, enter 9.8..0.
6.
In the Subnet Mask field, enter ...0.
7.
To create the first subnet, click Add to lst.
8.
In the LAN IP Address field, enter 9.8.0.0.
9.
In the Subnet Mask field, enter ...0.
10.
To create the second subnet, click Add to lst.
11.
Click Save Settng.
12.
Click Ext.
13.
On the Network screen, click Save Settngs.
14.
Click the More tab.
15.
Click the Advanced Routng tab.
16.
4-Port SSL/IPSec VPN Router
Configuration of Multiple Subnets
Setup > Advanced Routing
In the Static Routing section, enter 9.8..0 in the
17.
Destination IP field.
18. Enter ...0 in the Subnet Mask field.
19. Enter 9.8.. in the Default Gateway field.
20. Enter  in the Hop Count field.
21. Select LAN from the Interface drop-down menu.
22. To create the first static route, click Add to lst.
23. In the Statc Routng section, enter 9.8.0.0 in
the Destination IP field.
24. Enter ...0 in the Subnet Mask field.
25. Enter 9.8..0 in the Default Gateway field.
26. Enter  in the Hop Count field.
27. Select LAN from the Interface drop-down menu.
28. To create the second static route, click Add to lst.
29. Click Save Settngs.

RV042 #1 Configuration

1. Launch the web browser for a computer connected
one of the Ethernet ports of the RV042 #1.
2. Access the web-based utility of the RV042 #1. (Refer to
the User Guide of the RV042 for details.)
3. Click the Setup tab.
Click the More tab.
4.
Click the Advanced Routng tab.
5.
For the Working Mode setting, select Router.
6.
In the Statc Routng section, enter 9.8..0 in
7.
the Destination IP field.
8. Enter ...0 in the Subnet Mask field.
9