Removal Of The Virtual Passage Client (Mac Os X) - Cisco Linksys RVL200 User Manual

Appendx B
2. A screen may appear indicating that the certificate
cannot be verified. Linksys has confirmed that the
certificate is valid.
Click Contnue.
Click to Continue
On the Warning screen, click Run.
3.
Click Run
4. Enter your password for OS X.
To install the Virtual Passage Client, click OK.
Enter Your Password
After the software is installed, you will be notified that the
SSL VPN tunnel has been established.
SSL VPN Tunnel Established
To end the SSL VPN connection, click Dsconnect.
4-Port SSL/IPSec VPN Router
Virtual Passage SSL VPN Client
NOTE: If you used Safari or Firefox to establish
the SSL VPN connection through HTTP and want
to switch to HTTPS to re-establish the SSL VPN
connection, you must close your web browser
before switching to HTTPS.
Removal of the Virtual Passage Client (Mac
OS X)
To remove the Virtual Passage Client, follow these
instructions:
1. In the sentence, "Click here to Uninstall VPN Tunnel
client", click the word here.
Click the Word "Here"
2. Enter your password for OS X.
To uninstall the Virtual Passage Client, click OK.
Enter Your Password
3. After the software is removed, you will be notified.
Click OK.
Click OK