Wizard; Basic Setup - Cisco Linksys RVL200 User Manual

Chapter 4
Log > System Statistics
Click Refresh to update the statistics.

Wizard

Use this tab to access two Setup Wizards, the Basic Setup
Wizard and the Access Rule Setup Wizard. Run the Basic
Setup Wizard to set up the Router for your Internet
connection(s). Run the Access Rule Setup Wizard to set up
the security policy for the Router.
Wizard

Basic Setup

1. Click Launch Now to run the Basic Setup Wizard.
4-Port SSL/IPSec VPN Router
Advanced Configuration
2. Your Internet Service Provider (ISP) may require you
to use a host and domain name for your Internet
connection. If your ISP requires them, complete the
Host Name and Domain Name fields; otherwise leave
these blank. Click Next to continue. Click Ext if you
want to exit the Setup Wizard.
Host and Domain Name
3. Select the WAN (or Internet) Connection Type for the
WAN port. Select the appropriate connection type:
Obtan an IP automatcally, Statc IP, or PPPoE. Click
Next to continue. Click Prevous if you want to return
to the previous screen. Click Ext if you want to exit the
Setup Wizard.
WAN Connection Type
49