Appendix Q: Specifications - Cisco Linksys RVL200 User Manual

Appendx Q
Appendx Q:
Specfcatons
Specficatons
Model RVL200
Standards IEEE 802.3, IEEE 802.3u, IEEE 802.1q,
IEEE 802.1p, RFC791 (IP Protocol)
Ports Ethernet, Power
Button Reset
Cabling Type UTP CAT 5
LEDs Power, Diag, Internet, Ethernet 1-4
Operating System Linux
Performance
NAT Throughput Wirespeed - 100 Mbps
SSL Throughput 16.99 Mbps
Setup/Configuraton
Web UI Built-in Web UI for Easy
Browser-Based Configuration
(HTTP/HTTPS)
Management
SNMP Version SNMP Version 1, 2c, 3
Event Logging Event Logging: Local, Syslog, E-mail
Web F/W Upgrade Firmware Upgradeable through
Web Browser, and TFTP Utility
Diags: Flash, etc. Diags: Flash, RAM
Port Mirroring One of the 5 WAN/LAN Ports can be
Mirrored to a Selected LAN Port
Securty
Encryption DES, 3DES, AES
Access Control Access Rules based on IP and
TCP/UDP Ports
Firewall SPI (Stateful Packet Inspection)
Firewall
Content Filtering URL Blocking, Keyword Blocking
DoS Denial of Service (DoS) Prevention
(Ping of Death, SYN Flood,
IP Spoofing)
Secure Management HTTPS, Username/Password
QoS
Layer 2 Prioritization Based on
DSCP, 802.1p, or Physical
Ports
4-Port SSL/IPSec VPN Router
Bandwidth Management of WAN
(Upstream and Downstream) based
on Services (TCP/UDP Ports)
Network
VLAN Support Supports 16 802.1Q VLANs
DHCP DHCP Server, DHCP Client
DNS Relay, Proxy, Dynamic DNS
NAT PAT, NAPT, SIP ALG Support
DMZ One PC in the LAN can be
Configured as a DMZ Host
Static DHCP DHCP Server Supports Static IP
Address Based on MAC Address
VPN
5 SSL Tunnels for Remote Client
Access (Requires ActiveX-Enabled
Browsers, e.g., IE and Netscape)
1 IPSec Gateway-to-Gateway
Tunnel for Branch Office
Connectivity
DES/3DES/AES Encryption
MD5/SHA1 Authentication
IPSec NAT-T
VPN Passthrough of PPTP,
L2TP, IPSec
Routng
Static and RIP v1, v2
Envronmental
Dimensions 6.69" x 1.67" x 6.69"
W x H x D (170 x 42.5 x 170 mm)
Unit Weight 13.76 oz. (0.39 kg)
Power 5V, 2A
Certifications FCC Class B, CE, ICES-003
Operating Temp. 0 to 40ºC (32 to 104ºF)
Storage Temp. -20 to 70ºC (-4 to 158ºF)
Operating Humidity 10% to 85% Noncondensing
Storage Humidity 5% to 90% Noncondensing
Specifications are subject to change without notice.
Specifications
0