Srw2048 Configuration - Cisco Linksys RVL200 User Manual

Appendx L
Select Enable VLAN.
5.
6. Enter  in the VLAN ID field.
7. To create VLAN2, click Add VLAN.
8. Enter  in the VLAN ID field.
9. To create VLAN3, click Add VLAN.
10. Enter 4 in the VLAN ID field.
11. To create VLAN4, click Add VLAN.
12. Click the Port Settng tab.
Port Management > Port Setting
For Port ID 4, select Trunk as the Mode.
13.
Click Save Settngs.
14.
Click the VLAN Membershp tab.
15.
Port Management > VLAN Membership
Select  from the VLAN ID drop-down menu.
16.
17. Enter a description in the Description field.
Select Tagged in the Port 4 column.
18.
Select  from the VLAN ID drop-down menu.
19.
20. Enter a description in the Description field.
Select Tagged in the Port 4 column.
21.
Select 4 from the VLAN ID drop-down menu.
22.
4-Port SSL/IPSec VPN Router
Multiple VLANs with Computers
23. Enter a description in the Description field.
24. Select Tagged in the Port 4 column.
25. Click Save Settngs.
NOTE:
All VLANs will be part of the default
subnet of the Router. If you want to use multiple
subnets with your VLANs, refer to "Appendix M:
Multiple VLANs and Subnets".

SRW2048 Configuration

To configure VLANs 2, 3, and 4, refer to the documentation
for the SRW2048.
9