Table of Contents
Advertisement
Print Server Administration User's Guide
♦
The
lp=
Since the printer is a remote printer, this entry should be
blank.
♦
sd=dir
♦
mx#blocks
directory; 0 means no limit.
♦
rm=address
in this case the TE100-PS3 print server.
♦
rp=printer
For the TE100-PS3 print server, the port name should be
used. Note: this entry is case-sensitive.
Printing from SCO Unix System V/386
To allow printing to a printer attached to your TE100-PS3 network
print server from a SCO Unix System V/386 host,
1. Login as the superuser (root).
2. Add an entry for the print server in the host's
file, giving a host name for the print server's IP address. A
line in
aliases for the host. For example:
202.39.74.40
If you use DNS (the Domain Naming Services protocol), you
can add an address record entry to your DNS database for the
print server.
3. Change to the
mkdev rlp
82
entry is used to specify a local printer device.
lp
The location of the printer's local spool directory.
The limit for print job files in the local spool
The host where the remote printer is located,
The name of the printer on the remote host.
contains an IP address and one or more
/etc/hosts
ps-142634 ps-142634.dlink.com.tw
directory, and issue the command
/dev
/etc/hosts
Setting up Unix TCP/IP Printing
Advertisement
Table of Contents
