Resetting the Print Server
Sometimes it may be desirable to restart your network print server,
in order to reset its internal statistics counters or to clear other
status information.
There are two different ways to reset the print server:
♦ An ordinary reset has the same effect as powering off the
print server and powering it back on again. Statistics
counters will be cleared, but all of the print server's
configuration settings will be retained.
♦ A factory reset not only restarts the print server, but changes
all of its configuration settings back to their original values,
as the print server was shipped from the factory.
WARNING: Do not perform a factory reset unless you are absolutely sure
this is what you want. All settings will be erased and replaced
with their original values.
To perform the reset:
1. Select Reset or Factory Reset from the Tools menu.
2. EtherPort Admin will ask for confirmation for the reset.
3. Click Yes to confirm. The print server will reset itself. If
you selected Factory Reset, all of the print server's default
configuration values will be restored.
EtherPort Admin Administration
Print Server Administration User's Guide
105