Table of Contents
Advertisement
For more information about configuring print servers, printers, and
print queues, consult your NetWare documentation.
Setting up as a NetWare Remote Printer
Your network print server can also be set up as NetWare remote
printer. This allows slightly easier administration, but may
increase printing delays. To set up a printer port as a remote
printer port,
1. Make sure you are logged on to your NetWare server as
Admin, or that you have permissions equivalent to Admin.
2. Make sure that the NetWare protocol is enabled in the
server. This setting is found in the Server Device
Configuration window, accessible by selecting the print
server and choosing Server Device... from the
Configuration window.
3. Make sure you have a NetWare print server created and
running on your NetWare file server. Consult your NetWare
documentation for instruction on how to do this.
4. Choose NetWare Protocol... from the EtherPort Admin
Configuration menu, or click the Configure NetWare button
in the toolbar. Click on the Remote Printer tab.
5. Click on the port number button corresponding to the port
you will be using for remote printer service.
6. Click on the NDS Remote Printer selection. EtherPort
Admin will display the tree structure of the NetWare NDS
contexts accessible from your network.
Setting up Novell NetWare 4.x Printing
Print Server Administration User's Guide
47
Advertisement
Table of Contents
