Print Server Administration User's Guide
3. The Setup program will begin by copying some files and ask
for your confirmation. Click the Next > button to continue.
4. The Setup program will then ask you to select a directory on
your hard disk where you want it to install the EtherPort
Admin program. If you want a destination directory path
other than the one shown, click the Browse... button to select
it.
Click the Next > button to continue the installation.
5. The setup program will copy EtherPort Admin program files
to the directory you selected, as well as create an EtherPort
Admin program group. Press the Finish button to complete
the installation.
Once the installation is complete, you can begin using EtherPort
Admin.
Starting EtherPort Admin
If you are using Windows 95 or Windows NT 4.0 (or a later
version of Windows), to start the EtherPort Admin program:
1. Press the Start button in the "Task Bar".
2. Within the Programs menu, select EtherPort Admin.
3. Select the EtherPort Admin program.
10
Installing and Starting the EtherPort Admin Program