Setting A Password For Your Print Server - TRENDnet TE100-PS3 Administrator User Manual

Print Server Administration User's Guide
4. Choose Save Configuration from the Configuration menu,
or press the Save Configuration button on the toolbar. This
will store the new settings into the print server and restart it.
Your print server will now be accessible under the new name.

Setting a Password for Your Print Server

Unless you set a password, anyone on your network will be able to
change your print server's settings. If your local network is
connected to the Internet, then it may be possible to change your
print server's configuration from anywhere in the world using the
telnet
should set a password for your print server, and record it in a safe
place.
To set the print server's password,
1. Select the print server in the EtherPort Admin main
window's server name display (or extended server display).
2. Choose Server Device... from the Configuration menu, or
press the Configure Server button in the toolbar. (If you
14
interface. To protect your print server's integrity, you
Getting Started Setting up Your Print Server