Print Server Administration User's Guide
MS-DOS/PC-DOS Workstations
To connect your MS-DOS/PC-DOS workstation using client
software such as
♦ Microsoft LAN Manager client
♦ Microsoft NT Server client
♦ Microsoft Windows for Workgroups (DOS client)
you will normally use the
DOS-based NetBEUI client to a printer attached to your TE100-
PS3 print server,
1. Choose a free printer port (LPT1, LPT2, or LPT3) not being
used on the workstation. If you never connect a printer
directly to the workstation's physical printer port, you should
probably choose LPT1.
2. Type the command
NET USE port \\computer name\printer name
where
name
name
connect LPT1 to the printer on port PS-142634-P1 on the print
server PS-142634, use the command:
NET USE LPT1 \\PS-142634\PS-142634-P1
3. You can add the above line to your
you always wish to be connected to the printer.
66
NET USE
is the name of the free printer port,
port
is the name of the TE100-PS3 print server, and
is the name of the print server's port. For example, to
command. To connect a
computer
printer
file if
AUTOEXEC.BAT
Setting up Microsoft Network Printing