Setting Up As A Netware Print Server - TRENDnet TE100-PS3 Administrator User Manual

NetWare file server to be more heavily loaded, and increases
delays in network printing.

Setting up as a NetWare Print Server

This section describes how to configure your TE100-PS3 print
server to act as a NetWare print server, and how to set up a print
server port to serve a print queue on the file server.
1. Make sure you are logged on to your NetWare server as
SUPERVISOR, or that you have permissions equivalent to
SUPERVISOR.
2. Make sure that the NetWare protocol is enabled in the
server. This setting is found in the Server Device
Configuration window, accessible by selecting the print
server and choosing Server Device... from the
Configuration window.
3. Choose Netware Protocol... from the Configuration menu,
or click the Configure NetWare button in the toolbar. Click
on the Bindery Print Server tab.
Setting up Novell NetWare 3.x Printing
Print Server Administration User's Guide
25