Setting Up As A Netware Remote Printer - TRENDnet TE100-PS3 Administrator User Manual

9. Click OK, then choose Save Configuration from the
Configuration menu (or press the Save Configuration
toolbar button) to change the settings in the print server and
the NetWare server. The print server will restart itself and
begin serving the specified print queue.
If you created the print queue in step 6, you may need to assign
queue operators and queue users to the print queue using
EtherPort Admin or the NetWare
SUPERVISOR is assigned as the print queue's operator, and all
members of the group EVERYONE are allowed to use the print
queue. For information about assigning print queue users and
operators using EtherPort Admin, see the Managing Print Queues
section on page 99.

Setting up as a NetWare Remote Printer

Your network print server can also be set up as NetWare remote
printer. This allows slightly easier administration, but may
increase printing delays. To set up a printer port as a remote
printer port,
Setting up Novell NetWare 3.x Printing
Print Server Administration User's Guide
program. By default,
PCONSOLE
27