Print Server Administration User's Guide
1. Disable
2. Enable
0. Return to SNMP Traps Menu
Enter Selection:
Once traps are enabled, you can assign up to three different
hosts as designated trap recipients. With each trap recipient IP
address, there is also an associated SNMP community name
that will be included in the IP request. To change an IP address
or community name, select the appropriate menu item and enter
the desired value.
3. When you are done changing TCP/IP settings, choose 0 to
return to the Main Menu.
4. Choose the Save Configuration menu item. The print server
will ask for confirmation:
Do you really want to save the configuration?
(y/n)
Answer
drop, and the print server will reset itself, letting the new
TCP/IP settings take effect.
Changing Server Settings
From the Server Configuration menu, you can change the server
name, as well as the Location and Contact fields (used for
identifying the location of the print server and the person
responsible for maintaining it).
116
to confirm the save. The
y
Appendix: Telnet Interface Administration
connection will
telnet