Setting up U
NIX
TE100-PS3 network print servers can provide print services to
systems using the
systems are capable of supporting
This chapter explains how to use EtherPort Admin to configure the
print server for TCP/IP printing, and how to configure your Unix
workstations to print to the TE100-PS3 print server.
For TCP/IP networks without a Windows-based workstation
available, you can use the
server. See Appendix: Telnet Interface Administration on page
111 for more information about using the
Configuring TCP/IP Network Settings
To configure your TE100-PS3 network print server to allow
TCP/IP-based printing, as well as SNMP and
management,
1. Make sure the TCP/IP protocol is enabled. The TCP/IP
check box in the Server Device Configuration window needs
to be checked. Select the print server and choose Server
Device... from the Configuration menu to display this
window.
Setting up Unix TCP/IP Printing
TCP/IP Printing
/
network printing protocol. Most U
lpr
lpd
lpd
interface to configure the print
telnet
Print Server Administration User's Guide
.
interface.
telnet
-based
telnet
NIX
75