Canon FaxPhone L170 Basic Manual page 170

3.DRPD: SELECT FAX
4.INCOMING RING
5.MAN/AUTO SWITCH
15
15-10 Menu Descriptions
Name
2.F/T RING TIME
3.F/T SWITCH ACTION
RECEIVE
DISCONNECT
DOUBLE RING
SHORT-SHORT-LONG
SHORT-LONG-SHORT
OTHER RING TYPE
NORMAL RING
OFF
ON
RING COUNT
OFF
ON
F/T RING TIME
Descriptions
Sets the length of time the machine rings to
alert you of an incoming call.
015 to 300SEC (015 SEC)
Selects the action taken after the F/T RING
TIME expires.
The machine switches to the fax receive mode
automatically at this point and starts to receive
the document.
The machine disconnects the call.
If you select DRPD as the receive mode, select
the ring pattern for the fax.
Two short rings at regular intervals.
Short-Short-Long at regular intervals.
Short-Long-Short at regular intervals.
Other type of ring pattern.
Ring type of normal telephone line.
Sets whether the machine rings when it
receives a call when the machine is set to
FaxOnly.
The machine does not ring when it receives a
fax. (In Energy Saver mode, the fax may ring
one or two times.)
The machine rings when it receives a fax if a
telephone is connected.
Sets the number of incoming rings before the
machine answers.
01 to 99TIMES (02TIMES)
Sets whether the machine switches to
document receive mode after ringing for a
specified length of time in the manual receive
mode.
The machine keeps ringing until someone
answers the call manually with a connected
extension telephone.
The machine switches to document receive
mode after ringing for a specified time.
Sets the length of time to elapse before the
machine switches to the document receiving.
01 to 99SEC (15SEC)
(The factory default setting is in bold face.)