Receiving Faxes In Memory When A Problem Occurs - Canon FaxPhone L170 Basic Manual

Canon faxphone l170: basic guide
Hide thumbs Also See for FaxPhone L170:
Table of Contents

Advertisement

Receiving Faxes in Memory When a Problem Occurs

The machine will automatically receive incoming faxes into its memory if it encounters a problem that prevents it from
printing normally. The LCD will display <RECEIVED IN MEMORY> and a message showing the problem. See below the
error messages, their cause and the action you need to take to correct the problem.
NOTE
The machine memory can store up to approx. 450 LTR-size pages*.
Once the pages are printed, they are deleted from memory.
If the memory becomes full, you will not be able to receive the remaining pages. Contact the other party and ask them to resend the
remaining pages of the fax.
If the machine receives a document into its memory, the LCD displays one of the following messages. These messages
show the action you must take to correct the problem.
R E P L A C E C A R T R I D G E
7
Cause: The toner cartridge ran out of toner or is not installed properly.
Action: Make sure the cartridge is installed properly, and install a new one if necessary. See "Installing/Replacing the
Toner Cartridge," on p. 2-16.
S U P P L Y R E C . P A P E R
Cause: The machine ran out of paper.
Action: Add paper to the paper cassette/multi-purpose feeder. See "Loading Paper," on p. 4-3.
R E C . P A P E R J A M
Cause: A paper jam occurred.
Action: Clear the jam. See "Clearing Jams," on p. 13-1.
Cause: Over capacity on the output tray.
Action: Take out sheets from output tray and clear the paper jam. See "Clearing Jams," on p. 13-1.
Once you have corrected the problem, the machine automatically prints the documents stored in memory.
* Based on Canon FAX Standard Chart No.1, standard mode
7-6
Receiving Faxes in Memory When a Problem Occurs
O P E N P R I N T E R C O V E R

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents