Brother PT-3600 User Manual page 35

9 Check that the installation will be per-
formed as desired, and then click the Install
button. After P-touch Quick Editor is
installed, a dialog box appears, indicating
that the installation is finished.
0 Click the Done button, and then restart the
computer.
Installing the printer driver
(Mac OS X v10.1 or v10.2)
To install the printer driver:
1 With the P-touch and the Macintosh turned off,
connect the P-touch to the computer using the
enclosed USB interface cable as described on
page 9. Be sure to leave the P-touch turned off.
2 Turn on the Macintosh.
3 Insert the enclosed CD-ROM into the com-
puter's CD-ROM drive.
4 Double-click the Mac OS X folder to open
it.
5 Double-click the Driver Installer icon in the
folder that appears. The installer starts up,
and then the Introduction dialog box
appears.
NOTE
When the Next button is pressed, a message may
appear, warning that an older version of the printer
driver is installed. Be sure to uninstall the older ver-
sion of the printer driver before trying to install the
new driver. For details on uninstalling the printer
driver, refer to To uninstall the printer driver: on
page 32.
6 Click the Next button. A dialog box
appears, allowing you to check the installa-
tion.
7 Check that the installation will be per-
formed as desired, and then click the Install
button. After the printer driver is installed, a
dialog box appears, indicating that the
installation is finished.
Ch. 2 Getting Started
23