Brother PT-3600 User Manual page 23

4 Type the necessary information into the
appropriate boxes (If the information has
already been registered in Windows
automatically appear.), and then click the
Next button. A dialog box appears, asking
for confirmation of the entered information.
5 Click the Yes button to register the entered
information.
NOTE
To change the registration information, click the No
button, and then return to step
The Setup Type dialog box appears.
6 Select the installation method, and then
click the Next button.
G For a Typical or Compact installation
Selecting "Typical" or "Compact", then
clicking the Next button immediately
starts installation.
Typical: All of the basic options (P-touch
Editor 3.2, Clip art, Auto Format tem-
plates, Help and fonts) are installed.
Compact: Only P-touch Editor 3.2 is
installed.
®
, it will
4
.
Ch. 2 Getting Started
G For a Custom installation
Selecting "Custom", then clicking the
Next button displays a dialog box that
allows you to select which options to
install. Only the options with a check
mark beside them will be installed. In
addition to the basic options listed for a
Typical installation, the User's Guide can
also be installed.
1) Select which options to install.
Editor: P-touch Editor 3.2 software
Clip Art: Illustrations for the P-touch
Editor 3.2 Clip Art function
Fonts
Auto Format Templates: Templates for
the Auto Format function
Help: Help files for P-touch Editor 3.2
User's Guide: HTML User's Guide for
P-touch Editor 3.2 (The User's Guide
can also be viewed from the CD-
ROM.)
Transfer Manager: (PT-9600 only-not
compatible with the software for the
PT-3600) Two applications: Transfer
Manager (which allows you to transfer
templates, a database linked to a tem-
plate or image data to the P-touch from
a computer) and Backup Manager
(which allows you to back up P-touch
data on a PC and transfer it back to the
P-touch)
If the Change button can be clicked
while an option is selected, sub-com-
ponents can be selected. Click the
Change button to display the Select
Sub-components dialog box, and then
select the sub-components that you
wish to install by putting a check mark
beside them.
11