Brother PT-3600 User Manual page 27

4 Click the Finish button.
NOTE
If a dialog box appears, indicating that the installa-
tion is finished and explaining that the computer
should be restarted, select the option for restarting
the computer, click the Finish button to restart the
computer, and then remove the CD-ROM from the
computer.
®
With Windows XP:
1 In the dialog box that appears, allowing you to
select whether the P-touch will be connected
with a USB cable or an RS-232C cable, select
"USB cable", and then click the OK button. A
dialog box appears, informing you that the PT-
9600/3600 printer driver will be installed.
2 Click the Next button. A dialog box
appears, instructing you to connect the P-
touch to the computer.
3 Connect the P-touch to the computer using
the enclosed USB interface cable as
described on page 9, and then turn on the
P-touch. The first Found New Hardware
Wizard dialog box appears.
4 Select "Install the software automatically
(Recommended)", and then click the Next
button. A dialog box appears, warning that
the software has not passed Windows
Logo testing.
5 Click the Continue Anyway button to con-
tinue with the installation. A Found New
Hardware Wizard dialog box appears, indi-
cating that the Found New Hardware Wiz-
ard has finished installing the software for
the PT-9600/3600.
Ch. 2 Getting Started
®
15