Brother PT-3600 User Manual page 33

0 Check that the installation will be per-
formed as desired, and then click the Install
button. After P-touch Editor is installed, a
dialog box appears, indicating that the
installation is finished.
A Click the Done button, and then restart the
computer.
Installing the P-touch Quick Editor software
The P-touch Quick Editor software provides
quick access to the more simple label-designing
features for easy text input and instant printing
of labels. Install the P-touch Quick Editor soft-
ware onto a Macintosh as described below.
With a Mac OS before OS X:
1 With the P-touch and the Macintosh turned
off, connect the P-touch to the computer
using the enclosed USB interface cable as
described on page 9. Be sure to leave the
P-touch turned off.
2 Turn on the Macintosh.
3 Insert the enclosed CD-ROM into the com-
puter's CD-ROM drive.
4 Double-click the Mac OS 9 folder to open it.
5 Double-click the P-touch Quick Editor
Installer icon in the folder that appears. The
installer starts up.
6 Select the installation method.
G For a basic installation
Clicking the Install button immediately
starts installing the most basic options.
NOTE
About 20 MB of available hard-disk space is
needed to begin installation. If enough hard-disk
space is available, click the Install button.
G For a custom installation
Clicking the Custom Install button dis-
plays a dialog box that allows you to
select which options to install.
Only the options with a check mark
beside them are installed. Select the
options that you wish to install, and then
click the Install button.
NOTE
In order to print from the P-touch 9600/3600, "PT-
9600/3600 Driver" must be selected for installa-
tion.
Ch. 2 Getting Started
21