Brother PT-3600 User Manual page 25

NOTE
To install just the printer driver, click the lower
button (Driver). The first Driver Setup dialog
box appears, allowing you to select whether the
P-touch will be connected through the USB port
or the RS-232C port. Continue with the proce-
dure in Installing the USB printer driver on
page 14. (To install the serial printer driver,
refer to the Advanced Functions booklet.)
To install the P-touch Editor 3.2 software, click
the upper button (P-touch Editor). Continue
with the procedure in Installing the P-touch Edi-
tor 3.2 software on page 10.
3 Carefully read the contents of the Welcome
dialog box, and then click the Next button
to continue. The User Information dialog
box appears.
4 Type the necessary information into the
appropriate boxes (If the information has
already been registered in Windows
will automatically appear.), and then click
the Next button. A dialog box appears, ask-
ing for confirmation of the entered informa-
tion.
5 Click the Yes button to register the entered
information.
NOTE
To change the registration information, click the No
button, and then return to step
The Choose Destination Location dialog
box appears.
6 Click the Next button to begin installation.
NOTE
To change the location where P-touch Quick Editor
will be installed, click the Browse button, and then
select the installation folder in the Choose Folder
dialog box that appears. Then, click the OK button.
After P-touch Quick Editor is installed, a
dialog box appears, allowing you to select
where shortcuts to P-touch Quick Editor
will be added.
Ch. 2 Getting Started
®
, it
4
.
13