Brother PT-3600 User Manual page 22

Ch. 2 Getting Started
Installing the P-touch Editor 3.2
software
The P-touch Editor 3.2 software includes a variety
of more complex functions for printing barcodes
and images, enabling you to design just about any
label that you can image. Install the P-touch Editor
3.2 software onto a PC as described below.
NOTE
Do not connect the P-touch to the computer before
installing the software, otherwise it may not be
installed correctly. Be sure to connect the P-touch
only when you are instructed to do so.
To install the P-touch Editor 3.2 software
1 Insert the enclosed CD-ROM into the com-
puter's CD-ROM drive. A dialog box auto-
matically appears, allowing you to select
what to install.
NOTE
If the dialog box does not automatically appear,
double-click "My Computer" on the desktop, and
then double-click the CD-ROM drive containing
the CD-ROM. (For Windows
puter" in the Start menu, and then double-click the
CD-ROM drive containing the CD-ROM.) Next,
double-click "Setup.exe" to display the dialog box.
2 Click the upper button (P-touch Editor). The
®
InstallShield Wizard for installing the
P-touch Editor software starts up, and then
the Welcome dialog box appears.
10
®
XP, click "My Com-
NOTE
To install just the printer driver, click the lower
button (Driver). The first Driver Setup dialog
box appears, allowing you to select whether the
P-touch will be connected through the USB port
or the RS-232C port. Continue with the proce-
dure in Installing the USB printer driver on
page 14. (To install the serial printer driver,
refer to the Advanced Functions booklet.)
To install the P-touch Quick Editor software,
click the middle button (P-touch Quick Editor).
Continue with the procedure in Installing the P-
touch Quick Editor software on page 12.
3 Carefully read the contents of the Welcome
dialog box, and then click the Next button
to continue. The User Information dialog
box appears.