Connections - Aiwa XR-H66MD Operating Instructions Manual

CONNECTIONS
Check your system and accessories
IjJ CX-NHWMDLI Main
unit
f~I SX-NH66 Front speakers
Remote control
AM antenna FM antenna
Operating Instructions, etc
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is
120 V AC. Check that the rated voltage matches your local
voltage.
IMPORTANT
Connect the speakers, antennas, and all optional equipment
first. Then connect the AC cord in the end.
There are no differences between the front speakers. Both
speakers can be connected as L (Left) or R (Right).
1
Connect the right and left speakers to the main
unit.
Connect the right speaker cord to the SPEAKERS R terminals,
and left to the SPEAKERS L terminals.
The s~eaker cord with the white stri~e should be connected
to the 0 terminal and the other cord to the O terminal
2,
FM antenna
2
AM antenna
1
Right speaker
"==-
\
3
AC cord
3
ENGLISH