Connections - Aiwa NSX-S505 Operating Instructions Manual

CONNECTIONS
Check your system and accessories
@ CX-NS505 Compact disc stereo cassette receiver
@ SX-FNS505 Front speakers (For NSX-S505)
@ CX-NS506 Compact disc stereo cassette receiver
@ SX-ANS706 Front speakers (For NSX-S506)
Remote control MW/LW loop antenna FM antenna
O000UUuLL
Operating Instructions, etc
3 ENGLISH
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is 230 V
AC. Check that the rated voltage matches your local voltage.
IMPORTANT
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord in the end.
To position the antennas
FM unipolar antenna:
Extend fully and position for the best possible reception.
This antenna is of an instant type, so the use of an outdoor antenna
is recommended.
MW/LW loop antenna:
Position to find the best possible reception.
To stand the MW/LW loop antenna on a surface
Fix the claw to the slot.
¢ Be sure to connect the speaker cords correctly. Improper
connections can cause short circuits in SPEAKERS terminals.
¢ Do not leave objects generating magnetism, such as credit
cards, near the speakers, as these objects may be damaged.
¢ Do not bring the FM antenna near metal objects or curtain rails.
¢ Do not bring the MW/LW loop antenna near other optional
equipment, the stereo system itself, the AC cord or speaker
cords, since noise will be picked up.
¢ Do not unwind the MW/LW loop antenna wire.