Uploading A Wx Switch Configuration Into 3Wxm - 3Com 3CRWX120695A Reference Manual

370 C 8: M
HAPTER ANAGING
Uploading a WX
Switch
Configuration into
3WXM
WX S I
YSTEM MAGES AND
Table 25 WX File Management Options in 3WXM (continued)
Option
Distribute changes
with policy manager
Deploy
Verify configuration
changes
Synchronize local and
network changes
Save image in
repository
Distribute Images &
Configuration
If you have already installed and configured a WX, you can upload its
configuration into 3WXM. You must first set the country code using the
set system countrycode command in the CLI. For more information
about this and other CLI commands, see the Wireless LAN Switch and
Controller Command Reference.
After you upload a WX configuration, the WX becomes a member of the
Mobility Domain specified in the configuration. If this Mobility Domain is
C
ONFIGURATIONS
Description
Copies all WX switch configuration parameter settings
from the domain polices to a WX switch. You also can
update the domain policies by copying parameters from a
WX switch.
(See "Working with Domain Policies" on page 400.)
Sends WX switch configurations from the network plan
into the live network, to implement the network plan on
the live WX switches.
(See "Deploying WX switches from a Network Plan to the
Network" on page 390.)
Checks WX switch configuration changes against a set of
configuration rules, alerts you to configuration items that
do not fit the rules, and enables you to either edit these
configuration items or ignore the rules.
(See "Verifying Configuration Information" on page 373.)
Compares WX switch configurations in the network with
their counterparts in the network plan, and enables you to
review the differences, and either deploy the new changes
to synchronize the configurations, or undo the changes.
(See "Synchronizing Local and Network Changes" on
page 383.)
Adds a WX system image to a repository. When you
distribute images and configuration files, you can select an
image from the repository.
(See "Distributing Image and Configuration Files" on
page 393.)
Applies software images to WX switches and optionally
reboots the WX switches to place the new images into
effect.
(See "Distributing Image and Configuration Files" on
page 393.)