130
C
4: P
HAPTER
LANNING THE
3C
M
S
OM
OBILITY
YSTEM
To create RF obstacles for multiple selected objects in a drawing
1 Click an object on the floor.
2 Press Shift while clicking on additional objects.
3 Right-click, and select Create RF Obstacle. The Create RF Obstacle
dialog box appears.
4 Go to "To use the Create RF Obstacle Dialog box" on page 130.
To create RF obstacles by grouping objects
You can group several objects in a drawing to specify them as one RF
obstacle. For example, if a wall consists of several lines, the lines can be
grouped. If you subsequently ungroup the objects, the RF obstacle
information is removed.
1 Select an object on the floor.
2 Press Shift while clicking additional objects.
3 Click the Group Objects icon. The grouped objects now appear as one
object group.
4 Right-click, and select Create RF Obstacle. The Create RF Obstacle
dialog box appears. See "To use the Create RF Obstacle Dialog box".
To use the Create RF Obstacle Dialog box
The Create RF Obstacle dialog box is shown in Figure 5.