Wx Switch; Wx Model Numbers - 3Com WX2200 - Wireless LAN Controller Hardware Installation Manual

1

WX Model Numbers

WX S
WITCH
A 3Com Wireless Switch (WX) provides mobility and authentication,
authorization, and accounting (AAA) services for wireless or wired users.
A WX switch also controls the operation of 3Com Managed Access Point
(MAP) access points, which control and manage IEEE 802.11 operation
over the air.
WARNING: Installation must be performed by qualified service personnel
only. Read and follow all warning notices and instructions marked on the
product or included in the documentation.
WARNING: There are no user-serviceable parts inside the WX switches.
Table 3 lists the WX switch model numbers.
Table 3 WX Switch Model Numbers
Model Port Configuration
WX2200 Two gigabit Ethernet ports. Each
port has a miniature Gigabit
interface converter (mini-GBIC) slot
for insertion of a small form-factor
pluggable (SFP) 1000BASE-SX or
1000BASE-LX fiber-optic interface.
One 10/100 Ethernet port for out-of-
band management (without PoE).
WXR100 Two 10/100BASE-TX Ethernet ports
Port 1 provides an uplink to the
network.
Port 2 supports Power over Ethernet (PoE)
and provides direct connection to a MAP
WX1200 Eight 10/100 Ethernet ports, six of
which support PoE
O
VERVIEW
Power Supply Configuration
Two 100-240V VAC autosensing
AC power supplies
One 100-240 VAC autosensing AC
power supply
One 100-120 VAC / 200-240 VAC
autosensing AC power supply