10 Do one of the following:
To configure Internet Group Management Protocol (IGMP)
information, click Next to display the VLAN IGMP page. (See
"Configuring IGMP".)
To close the wizard and save the changes, click Finish.
Configuring IGMP
Internet Group Management Protocol (IGMP) snooping controls multicast
traffic on a WX by forwarding packets for a multicast group only on the
ports that are connected to members of the group. IGMP is especially
useful for WLANs because bandwidth is relatively constrained. The WX
listens for multicast packets and maintains a table of multicast groups, as
well as their sources and receivers, based on the traffic. IGMP snooping is
enabled by default.
You can configure IGMP snooping parameters and enable or disable the
feature on an individual VLAN basis.
The current software version supports IGMP versions 1 and 2.
Configuring VLANs
201