Generating A Client Summary Report - 3Com 3CRWX120695A Reference Manual

Generating a Client
Summary Report
Table 58 WX Configuration Report Sections
Section
System Info
Mobility Domain
10/100 Ports
Gig Ports
VLANs
Spanning Tree
IP Properties
ACLs
APs
Distributed APs
Radio Profiles
Service Profiles
802.1X
RADIUS
Access Rules
Mobility Profile
Location Policy
Local User DB
The client summary report lists current client sessions.
The data for this report comes from the monitoring service. The Enable
client session collection option, located in the Client Monitor group
box of the Monitoring Settings tab, must be enabled. (See "Changing
Monitoring Settings" on page 552.)
1 Select Reports > Client Summary from the toolbar in the main 3WXM
window.
The Client Summary Report dialog box appears.

Generating a Client Summary Report

Description
Name, system IP address, software, states of the
management services, and states of active RF scanning
and countermeasures.
System IP address of the seed for the Mobility Domain the
WX switch is in.
10/100 Ethernet port settings configured on the WX
switch.
Gigabit port settings (if applicable configured on the WX
switch.
VLANs configured on the WX switch.
STP settings configured on the WX switch.
IP settings, including routes and DNS parameters,
configured on the WX switch.
Access Control Lists (ACLs) configured on the WX switch.
Directly connected MAPs configured on the WX switch.
Distributed MAPs configured on the WX switch.
Radio profiles configured on the WX switch.
Service profiles configured on the WX switch.
802.1X parameters configured on the WX switch.
RADIUS server groups and servers configured on the WX
switch.
AAA rules configured on the WX switch.
Mobility profiles configured on the WX switch.
Location policies configured on the WX switch.
Users configured in the local database.
487