System And Administrative Page - 3Com 3CRWX120695A Reference Manual

180 C 5: C
HAPTER ONFIGURING
System and
Administrative Page
WX S A
YSTEM AND DMINISTRATIVE
Blank — Error. Comparison of the parameters against the 3WXM
rules resulted in an error for at least one of the rules.
3WXM allows you to deploy the switch parameters to a switch if all
checkmarks are green. You also can deploy the parameters to a switch if
some checkmarks are orange, although 3Com recommends that you
carefully review the warnings first. You cannot deploy the switch
parameters if any of the checkmarks are blank.
In the example above, the enable password for the switch is not
specified. Since the enable password is required for 3WXM to access and
manage a WX switch, but is optional on the WX switch itself, the box
around the WX Properties checkmark is yellow to indicate a warning
condition, and the warning is explained in the verification results at the
bottom of the wizard.
If you disable a rule, the checkmark for the rule is automatically green.
(For information about disabling rules, see "Verifying Configuration
Information" on page 373.)
The System and Administrative page enables you to configure basic
switch parameters such as port types, VLANs, IP interfaces, time and date
settings, and so on. This page is shown above.
P
ARAMETERS