3Com 3CRWX120695A Reference Manual page 548

548 A D: C
PPENDIX HANGING
M S P
ONITORING ERVICE
a Select the Mobility Domain from the Mobility Domain box. The WX
switches configured in that Mobility Domain are listed.
b Click on the WX switches you want to add. To make multiple
selections, press Shift (for contiguous items) or Control (for
noncontiguous items) while clicking items.
c Click Add to add the WX switches to the monitoring service. The WX
switches appear in the table.
To close the Network Plan WX dialog box without saving changes,
click Cancel.
d If the monitoring service cannot reach the WX switch on the IP
address listed in the IP Address column, select the row for the WX
switch, then click Modify. Go to step 4c.
4 To add an individual WX switch, click Add. The Monitored WX dialog box
is displayed.
a Type the WX switch name in the Name box.
b Type the WX switch's serial number in the Serial Number box.
The serial number is located on the label on the back of the WX
switch. You also can display the serial number from the
command-line interface (CLI) by typing the show version
command.
c Type one of the WX switch's IP addresses in the IP Address box. The
monitoring service must be able to reach the WX switch on this IP
address.
If required, you can specify a different IP address for communication
between the 3WXM client and the WX switch. (See "Configuring Basic
WX Properties" on page 186.)
d Type the WX switch's enable password in the Password field.
REFERENCES